Détail de l'auteur
Auteur Zoubir Nemouchi |
Documents disponibles écrits par cet auteur (7)



Caractérisation des phénomènes complexes de l’écoulement turbulent tridimensionnel avec transfert de chaleur à travers une série d’aubes. / Karima Benkara-Mostefa-Heguehoug
![]()
Titre : Caractérisation des phénomènes complexes de l’écoulement turbulent tridimensionnel avec transfert de chaleur à travers une série d’aubes. Type de document : texte imprimé Auteurs : Karima Benkara-Mostefa-Heguehoug, Auteur ; Zoubir Nemouchi, Directeur de thèse Editeur : جامعة الإخوة منتوري قسنطينة Année de publication : 2018 Importance : 115 f. Format : 30 cm. Note générale : 2 copies imprimées disponibles. Langues : Français (fre) Catégories : Français - Anglais
Génie MécaniqueTags : aubes cascade angle de décalage écoulement secondaire simulation turbulence LES blade stagger angle secondary flow عنفات سلسلة زاوية الفرق تدفق ثانوي محاكاة اضطراب Index. décimale : 620 Génie Mécanique Résumé : The present work is a numerical study of the three dimensional turbulent steady or unsteady flow, with or without heat transfer, of an incompressible fluid through a series of blades similar to those used in turbomachines.
In the first part, the study addresses the steady turbulent flow through a series of 60 blades fixed on an annular structure (stator). The contribution within the framework of the present project is the exploration of the sensitivity of the dynamical behaviour of the flow to the variations of the turbulence intensity at the domain inlet. The effects on the fields of velocity, pressure, turbulent kinetic energy and turbulent viscosity are examined. The turbulence effects on the flow are taken into account using the standard k-ε model in
conjunction with,as a near-wall treatment, the standard wall function.
The second and more important part is a study of the three-dimensional turbulent incompressible and unsteady flow with and without heat transfer through a plane blade cascade comprised of six identical blades. This configuration is similar to that studied experimentally by Adjlout and Dixon (Journal of Turbomachinery, 114, pp.191-198, 1992).
Two cases are considered: the flow without heat transfer through the blade cascade with a stagger angle of 0°; the flow with heat transfer through the blade cascade with a stagger angle of 25°. This is the angle between a line normal to the pitch direction and a line parallel to direction of the chord. The turbulence effect on the flow is taken into account using the large eddy simulation approach. 3D mean and filtered fields of velocity, pressure, turbulent kinetic energy, subgrid turbulent viscosity and temperature are analysed. Also contours of friction and pressure coefficients and Nusselt number on the surface of the blades and the casing are
discussed. Particular attention is paid to the secondary flows induced between blades and at the blade/casing junction and their impact on the dynamical and thermal behaviours.
Diplôme : Doctorat en sciences En ligne : ../theses/gmecanique/HEG7199.pdf Format de la ressource électronique : Permalink : index.php?lvl=notice_display&id=10764 Caractérisation des phénomènes complexes de l’écoulement turbulent tridimensionnel avec transfert de chaleur à travers une série d’aubes. [texte imprimé] / Karima Benkara-Mostefa-Heguehoug, Auteur ; Zoubir Nemouchi, Directeur de thèse . - جامعة الإخوة منتوري قسنطينة, 2018 . - 115 f. ; 30 cm.
2 copies imprimées disponibles.
Langues : Français (fre)
Catégories : Français - Anglais
Génie MécaniqueTags : aubes cascade angle de décalage écoulement secondaire simulation turbulence LES blade stagger angle secondary flow عنفات سلسلة زاوية الفرق تدفق ثانوي محاكاة اضطراب Index. décimale : 620 Génie Mécanique Résumé : The present work is a numerical study of the three dimensional turbulent steady or unsteady flow, with or without heat transfer, of an incompressible fluid through a series of blades similar to those used in turbomachines.
In the first part, the study addresses the steady turbulent flow through a series of 60 blades fixed on an annular structure (stator). The contribution within the framework of the present project is the exploration of the sensitivity of the dynamical behaviour of the flow to the variations of the turbulence intensity at the domain inlet. The effects on the fields of velocity, pressure, turbulent kinetic energy and turbulent viscosity are examined. The turbulence effects on the flow are taken into account using the standard k-ε model in
conjunction with,as a near-wall treatment, the standard wall function.
The second and more important part is a study of the three-dimensional turbulent incompressible and unsteady flow with and without heat transfer through a plane blade cascade comprised of six identical blades. This configuration is similar to that studied experimentally by Adjlout and Dixon (Journal of Turbomachinery, 114, pp.191-198, 1992).
Two cases are considered: the flow without heat transfer through the blade cascade with a stagger angle of 0°; the flow with heat transfer through the blade cascade with a stagger angle of 25°. This is the angle between a line normal to the pitch direction and a line parallel to direction of the chord. The turbulence effect on the flow is taken into account using the large eddy simulation approach. 3D mean and filtered fields of velocity, pressure, turbulent kinetic energy, subgrid turbulent viscosity and temperature are analysed. Also contours of friction and pressure coefficients and Nusselt number on the surface of the blades and the casing are
discussed. Particular attention is paid to the secondary flows induced between blades and at the blade/casing junction and their impact on the dynamical and thermal behaviours.
Diplôme : Doctorat en sciences En ligne : ../theses/gmecanique/HEG7199.pdf Format de la ressource électronique : Permalink : index.php?lvl=notice_display&id=10764 Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité HEG/7199 HEG/7199 Thèse Bibliothèque principale Thèses Disponible Contribution a l’étude des jets impactants turbulents présentant une courbure des lignes de courant plus ou moins faible / Adra Benhacine (ép Nemouchi)
![]()
Titre : Contribution a l’étude des jets impactants turbulents présentant une courbure des lignes de courant plus ou moins faible Type de document : texte imprimé Auteurs : Adra Benhacine (ép Nemouchi), Auteur ; Zoubir Nemouchi, Directeur de thèse ; Lyes Khezzar, Directeur de thèse Editeur : Constantine : Université Mentouri Constantine Année de publication : 2012 Importance : 96 f. Format : 31 cm. Note générale : Doctorat en sciences
2 copies imprimées disponiblesLangues : Français (fre) Catégories : Français - Anglais
Génie MécaniqueTags : jets impactants turbulents courbure des lignes Energetique Index. décimale : 620 Génie Mécanique Diplôme : Doctorat en sciences En ligne : ../theses/gmecanique/NEM6101.pdf Format de la ressource électronique : Permalink : index.php?lvl=notice_display&id=6013 Contribution a l’étude des jets impactants turbulents présentant une courbure des lignes de courant plus ou moins faible [texte imprimé] / Adra Benhacine (ép Nemouchi), Auteur ; Zoubir Nemouchi, Directeur de thèse ; Lyes Khezzar, Directeur de thèse . - Constantine : Université Mentouri Constantine, 2012 . - 96 f. ; 31 cm.
Doctorat en sciences
2 copies imprimées disponibles
Langues : Français (fre)
Catégories : Français - Anglais
Génie MécaniqueTags : jets impactants turbulents courbure des lignes Energetique Index. décimale : 620 Génie Mécanique Diplôme : Doctorat en sciences En ligne : ../theses/gmecanique/NEM6101.pdf Format de la ressource électronique : Permalink : index.php?lvl=notice_display&id=6013 Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité NEM/6101 NEM/6101 Thèse Bibliothèque principale Thèses Disponible Développement d'un programme de calcul de l'écoulement avec transfert de chaleur dans une cavité avec des parois mobiles / Bachir Dahdi
![]()
Titre : Développement d'un programme de calcul de l'écoulement avec transfert de chaleur dans une cavité avec des parois mobiles Type de document : texte imprimé Auteurs : Bachir Dahdi ; Univ. de Constantine, Éditeur scientifique ; Zoubir Nemouchi, Directeur de thèse Année de publication : 2009 Importance : 57 f. Note générale : 01 Disponible à la salle de recherche 02 Disponibles au magazin de la B.U.C. 01 CD Langues : Français (fre) Catégories : Français - Anglais
Génie MécaniqueTags : Convection mixte Difference finie Schéma upwind Index. décimale : 620 Génie Mécanique En ligne : ../theses/gmecanique/DAH5421.pdf Permalink : index.php?lvl=notice_display&id=860 Développement d'un programme de calcul de l'écoulement avec transfert de chaleur dans une cavité avec des parois mobiles [texte imprimé] / Bachir Dahdi ; Univ. de Constantine, Éditeur scientifique ; Zoubir Nemouchi, Directeur de thèse . - 2009 . - 57 f.
01 Disponible à la salle de recherche 02 Disponibles au magazin de la B.U.C. 01 CD
Langues : Français (fre)
Catégories : Français - Anglais
Génie MécaniqueTags : Convection mixte Difference finie Schéma upwind Index. décimale : 620 Génie Mécanique En ligne : ../theses/gmecanique/DAH5421.pdf Permalink : index.php?lvl=notice_display&id=860 Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité DAH/5421 DAH/5421 Thèse Bibliothèque principale Thèses Disponible
Titre : Effet de l’ondulation de la surface sur le transfert de chaleur par jet impactant. Type de document : texte imprimé Auteurs : Amina Derdouri, Auteur ; Zoubir Nemouchi, Auteur Mention d'édition : 22 / 03 / 2021 Editeur : جامعة الإخوة منتوري قسنطينة Année de publication : 2021 Importance : 80 f. Format : 30 cm. Note générale : 1 copies imprimées disponibles
Langues : Français (fre) Catégories : Français - Anglais
Génie MécaniqueTags : G.Mécanique: Energétique jet impactant axisymétrique plan surface ondulée cavité carrée transfert de chaleur nombre de Nusselt modèle de turbulence SST k-ω approche LES axisymmetric impinging jet slot-jet grooved surface square grooves heat transfer Nusselt number SST k-ω turbulence model LES approach نقاث مصطدم ذو تناظر محوري مستو سطح متموج تجويف مربع الانتقال الحراري عدد نوسلت نموذج الاضطراب SST k-ω مقاربة LES Index. décimale : 620 Génie Mécanique Résumé :
The present work is a numerical simulation by the ANSYS Fluent code of a jet impinging on a surface fitted with square-shaped grooves. In the first part of this thesis, a parametric study on the flow dynamics and the heat transfer in an axisymmetric turbulent impinging jet is carried out using the SST k-ω turbulence model. Different parameters are varied: the groove size C, ranging from 0 to 1.5 (mm) (where C = 0 represents the smooth surface), the nozzleto-wall distance H/D ranging from 1 to 4, and the Reynolds number Re ranging from 5000 to 30000. The velocity, kinetic energy and temperature fields in the different regions of the domain and in particular inside the grooves are presented and discussed. The results show that an increase in the cavity size leads to an increase in friction and heat transfer. The comparison between the smooth wall and the corrugated walls shows that the latter improve the average Nusselt number by 80%, 82% and 85%, for the groove sizes 0.5, 1 and 1.5 mm respectively.
Concerning the effect of the nozzle-to-target-surface distance the best heat transfer performance is obtained by using the small distance H/D = 1. As for the effect of the Reynolds number, the highest value of the Nusselt number obtained corresponds to the value of Re = 30000. In the second part of the work, the unsteady turbulent isothermal flow of a plane-in-the-mean semi-confined jet impinging on a surface fitted with square grooves is simulated using the LES approach. The configuration considered is such that the nozzle-towall distance H/L = 2, the cavity size C = 5 (mm) and the Reynolds number Re = 5000.
Diplôme : Doctorat en sciences En ligne : ../theses/gmecanique/DER7742.pdf Format de la ressource électronique : Permalink : index.php?lvl=notice_display&id=11575 Effet de l’ondulation de la surface sur le transfert de chaleur par jet impactant. [texte imprimé] / Amina Derdouri, Auteur ; Zoubir Nemouchi, Auteur . - 22 / 03 / 2021 . - جامعة الإخوة منتوري قسنطينة, 2021 . - 80 f. ; 30 cm.
1 copies imprimées disponibles
Langues : Français (fre)
Catégories : Français - Anglais
Génie MécaniqueTags : G.Mécanique: Energétique jet impactant axisymétrique plan surface ondulée cavité carrée transfert de chaleur nombre de Nusselt modèle de turbulence SST k-ω approche LES axisymmetric impinging jet slot-jet grooved surface square grooves heat transfer Nusselt number SST k-ω turbulence model LES approach نقاث مصطدم ذو تناظر محوري مستو سطح متموج تجويف مربع الانتقال الحراري عدد نوسلت نموذج الاضطراب SST k-ω مقاربة LES Index. décimale : 620 Génie Mécanique Résumé :
The present work is a numerical simulation by the ANSYS Fluent code of a jet impinging on a surface fitted with square-shaped grooves. In the first part of this thesis, a parametric study on the flow dynamics and the heat transfer in an axisymmetric turbulent impinging jet is carried out using the SST k-ω turbulence model. Different parameters are varied: the groove size C, ranging from 0 to 1.5 (mm) (where C = 0 represents the smooth surface), the nozzleto-wall distance H/D ranging from 1 to 4, and the Reynolds number Re ranging from 5000 to 30000. The velocity, kinetic energy and temperature fields in the different regions of the domain and in particular inside the grooves are presented and discussed. The results show that an increase in the cavity size leads to an increase in friction and heat transfer. The comparison between the smooth wall and the corrugated walls shows that the latter improve the average Nusselt number by 80%, 82% and 85%, for the groove sizes 0.5, 1 and 1.5 mm respectively.
Concerning the effect of the nozzle-to-target-surface distance the best heat transfer performance is obtained by using the small distance H/D = 1. As for the effect of the Reynolds number, the highest value of the Nusselt number obtained corresponds to the value of Re = 30000. In the second part of the work, the unsteady turbulent isothermal flow of a plane-in-the-mean semi-confined jet impinging on a surface fitted with square grooves is simulated using the LES approach. The configuration considered is such that the nozzle-towall distance H/L = 2, the cavity size C = 5 (mm) and the Reynolds number Re = 5000.
Diplôme : Doctorat en sciences En ligne : ../theses/gmecanique/DER7742.pdf Format de la ressource électronique : Permalink : index.php?lvl=notice_display&id=11575 Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité DER/7742 DER/7742 Thèse Bibliothèque principale Thèses Disponible Etude des écoulements turbulents et du transport des particules solides dans des conduites comportant une singularité. / Farid Gaci
![]()
Titre : Etude des écoulements turbulents et du transport des particules solides dans des conduites comportant une singularité. Type de document : texte imprimé Auteurs : Farid Gaci, Auteur ; Zoubir Nemouchi, Directeur de thèse Editeur : جامعة الإخوة منتوري قسنطينة Année de publication : 2018 Importance : 156 f. Format : 30 cm. Note générale : 2 copies imprimées disponibles
Langues : Français (fre) Catégories : Français - Anglais
Génie MécaniqueTags : Ecoulement interne conduite courbe nombre de Dean approche LES coefficient de frottement nombre de Nusselt Internal flow curved duct Dean number LES approach friction coefficient Nusselt number الحركة الداخلية القناة المنحنية عدد دين مقاربة LESمعامل الاحتكاك رقم نوسلت Index. décimale : 620 Génie Mécanique Résumé : The present work is a contribution to the study, by numerical simulation, of the characteristics of stationary and transient internal flows of Newtonian fluids and the transport of solid particles occurring in different pipes with singularities. In the first part of this doctoral thesis, the main objective is to analyze the three-dimensional temporal evolution of vortex spatial structures and to highlight the sequence of bifurcation of laminar
flow in main and additional counter-rotating cells caused by the duct curvature and for different numbers of Dean. Moreover, with regard to the dynamic and thermal behaviors of the flow, it is the coefficient of friction Cf and the Nusselt number Nu that have been evaluated in order to examine the analogy that may exist between these two parameters along the bent part of the pipe. The effects of the Dean number and the curvature ratio of the pipe
are presented and discussed.
The second part consists of evaluating, first, the performance of turbulence models based on the RANS approach and bringing to light the adequate numerical model allowing to better simulate the internal flow through square cross-sections curved ducts. The Large Eddy Simulation (LES) approach is then used to simulate the flow of fluid through a 90° bend with a square cross-section for three different Dean numbers in order to explore unsteady turbulent
flow phenomena despite its excessive numerical cost. Statistical and filtered parameters characterizing the three-dimensional dynamic and thermal behaviours of the turbulent flow are analysed. Special attention is paid to the effects of secondary flows obtained by the different approaches and the complex unsteady coherent eddy structures captured by the LES approach, on the non-homogeneous distributions of friction and heat transfer on the internal,
external and lateral walls of the curved duct. In addition, an additional non-exhaustive study was presented. It deals with the injection of particles. These particles were injected into a curved pipe and the wall erosion rate was evaluated for different Reynolds numbers and particle sizes.
Diplôme : Doctorat en sciences En ligne : ../theses/gmecanique/GAC7308.pdf Format de la ressource électronique : Permalink : index.php?lvl=notice_display&id=10923 Etude des écoulements turbulents et du transport des particules solides dans des conduites comportant une singularité. [texte imprimé] / Farid Gaci, Auteur ; Zoubir Nemouchi, Directeur de thèse . - جامعة الإخوة منتوري قسنطينة, 2018 . - 156 f. ; 30 cm.
2 copies imprimées disponibles
Langues : Français (fre)
Catégories : Français - Anglais
Génie MécaniqueTags : Ecoulement interne conduite courbe nombre de Dean approche LES coefficient de frottement nombre de Nusselt Internal flow curved duct Dean number LES approach friction coefficient Nusselt number الحركة الداخلية القناة المنحنية عدد دين مقاربة LESمعامل الاحتكاك رقم نوسلت Index. décimale : 620 Génie Mécanique Résumé : The present work is a contribution to the study, by numerical simulation, of the characteristics of stationary and transient internal flows of Newtonian fluids and the transport of solid particles occurring in different pipes with singularities. In the first part of this doctoral thesis, the main objective is to analyze the three-dimensional temporal evolution of vortex spatial structures and to highlight the sequence of bifurcation of laminar
flow in main and additional counter-rotating cells caused by the duct curvature and for different numbers of Dean. Moreover, with regard to the dynamic and thermal behaviors of the flow, it is the coefficient of friction Cf and the Nusselt number Nu that have been evaluated in order to examine the analogy that may exist between these two parameters along the bent part of the pipe. The effects of the Dean number and the curvature ratio of the pipe
are presented and discussed.
The second part consists of evaluating, first, the performance of turbulence models based on the RANS approach and bringing to light the adequate numerical model allowing to better simulate the internal flow through square cross-sections curved ducts. The Large Eddy Simulation (LES) approach is then used to simulate the flow of fluid through a 90° bend with a square cross-section for three different Dean numbers in order to explore unsteady turbulent
flow phenomena despite its excessive numerical cost. Statistical and filtered parameters characterizing the three-dimensional dynamic and thermal behaviours of the turbulent flow are analysed. Special attention is paid to the effects of secondary flows obtained by the different approaches and the complex unsteady coherent eddy structures captured by the LES approach, on the non-homogeneous distributions of friction and heat transfer on the internal,
external and lateral walls of the curved duct. In addition, an additional non-exhaustive study was presented. It deals with the injection of particles. These particles were injected into a curved pipe and the wall erosion rate was evaluated for different Reynolds numbers and particle sizes.
Diplôme : Doctorat en sciences En ligne : ../theses/gmecanique/GAC7308.pdf Format de la ressource électronique : Permalink : index.php?lvl=notice_display&id=10923 Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité GAC/7308 GAC/7308 Thèse Bibliothèque principale Thèses Disponible Etude numérique des écoulements bidimensionnels élliptiques et tridimensionnels paraboliques / Kamel Zidani
PermalinkEtude par la programmation d’un jet rond turbulent impactant une plaque plane circulaire. / Amina Derdouri
![]()
Permalink