Détail de l'auteur
Auteur Hayat Berkane |
Documents disponibles écrits par cet auteur
Affiner la recherche Interroger des sources externes
Titre : Élaboration et caracterisation de revêtements durs Ti-Al, Ti-Al-N et Al-Cr-N Type de document : texte imprimé Auteurs : Hayat Berkane, Auteur ; L. Chekour, Directeur de thèse Editeur : constantine [Algérie] : Université Constantine 1 Année de publication : 2013 Importance : 98 f. Format : 30 cm. Note générale : 2 copies imprimées disponibles Langues : Français (fre) Catégories : Français - Anglais
PhysiqueTags : Revêtements durs PVD Contraintes résiduelle stabilité thermique Hard coatings Residual Stress stability thermique ??????? ??????? ????????? ???????? ????????? ??????? Index. décimale : 530 Physique Résumé :
This study focuses on the development and characterization of PVD thin film deposition of hard materials based on transition Ti, Cr doped with aluminum elements and / or nitrogen.Films TiAl, TiAlN and AlCrN were prepared by RF sputtering. The influence of film thickness on residual stresses was investigated.Analysis of residual stresses by the device shows that Newton's rings are compressive in nature, and are not homogeneous in terms of thickness.A peak stress 6GPa obtained for a power of about 250 W was observed for thicknesses of between 250 and 350 nm for the TiAl layer.Stresses decrease with temperature annealed suffered by AlCrN coatings and TiAl.The thickness of the layer increases with AlCrN the voltage applied Monitoring annealed at different temperatures samples coated TiAl, TiAlN and AlCrN we can note that Ti-Al films are stable up to 600 ° C; films Ti-Al-N are stable up to 800 ° C films and Al-Cr-N are stable up to 900 ° C.Diplôme : Magistère En ligne : ../theses/physique/BER6354.pdf Format de la ressource électronique : Permalink : https://bu.umc.edu.dz/md/index.php?lvl=notice_display&id=6322 Élaboration et caracterisation de revêtements durs Ti-Al, Ti-Al-N et Al-Cr-N [texte imprimé] / Hayat Berkane, Auteur ; L. Chekour, Directeur de thèse . - constantine (Route ain el bey, Algérie) : Université Constantine 1, 2013 . - 98 f. ; 30 cm.
2 copies imprimées disponibles
Langues : Français (fre)
Catégories : Français - Anglais
PhysiqueTags : Revêtements durs PVD Contraintes résiduelle stabilité thermique Hard coatings Residual Stress stability thermique ??????? ??????? ????????? ???????? ????????? ??????? Index. décimale : 530 Physique Résumé :
This study focuses on the development and characterization of PVD thin film deposition of hard materials based on transition Ti, Cr doped with aluminum elements and / or nitrogen.Films TiAl, TiAlN and AlCrN were prepared by RF sputtering. The influence of film thickness on residual stresses was investigated.Analysis of residual stresses by the device shows that Newton's rings are compressive in nature, and are not homogeneous in terms of thickness.A peak stress 6GPa obtained for a power of about 250 W was observed for thicknesses of between 250 and 350 nm for the TiAl layer.Stresses decrease with temperature annealed suffered by AlCrN coatings and TiAl.The thickness of the layer increases with AlCrN the voltage applied Monitoring annealed at different temperatures samples coated TiAl, TiAlN and AlCrN we can note that Ti-Al films are stable up to 600 ° C; films Ti-Al-N are stable up to 800 ° C films and Al-Cr-N are stable up to 900 ° C.Diplôme : Magistère En ligne : ../theses/physique/BER6354.pdf Format de la ressource électronique : Permalink : https://bu.umc.edu.dz/md/index.php?lvl=notice_display&id=6322 Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité BER/6354 BER/6354 Thèse Bibliothèque principale Thèses Disponible Documents numériques
texte intégraleAdobe Acrobat PDF
