Détail de l'auteur
Auteur Rabah Bensaha |
Documents disponibles écrits par cet auteur (15)



Caractéristiques optiques et structurales des couches minces de titane obtenues par voie Sol-Gel / Dounia Adnane
![]()
Titre : Caractéristiques optiques et structurales des couches minces de titane obtenues par voie Sol-Gel Type de document : texte imprimé Auteurs : Dounia Adnane ; Rabah Bensaha, Directeur de thèse Editeur : Constantine : Université Mentouri Constantine Année de publication : 2005 Importance : 103 f. Note générale : 01 Disponible à la salle de recherche 02 Disponibles au magazin de la B.U.C. 01 CD Langues : Français (fre) Catégories : Français - Anglais
PhysiqueTags : Couches minces Sol-gel Oxyde de titane Index. décimale : 530 Physique Résumé : TiO2 thin films were prepared on glass and ITO substrate by sol–gel process. Their structural and optical properties were examined of different steeping at various calcination temperatures. The films were characterized with X-ray Diffractométre, DSC, fluorescence X spectroscopy, UV-VISIBLE spectroscopy, optical microscopy and Fourier transform infrared spectroscopy (FTIR). The XRD
patterns show that the xerogel of TiO2 are amorphous, and they transform into the anatase phase from 350°C, and we notice the appearance of the phase brookite after 400°C. In the case of the sample obtained with 400°C and 10 steepings , we
observe the appearance of the phase rutile , normally this one must appear with
800°C. The crystallite size of TiO2 thin films is increased with increasing
calcination temperature. The color of the thin layers obtained varies according to
the temperature of annealing and of the number of steeping. The thickness varies
between 20–285nm. The thermal analysis of the powder shows that the
crystallization of TiO2 is from 400°C. The thin layers of TiO2 are transparent in the
visible and opaque in UV, and this some are the temperature of annealing and the
number of steeping. The increase in the number of steeping returns the layers
opaque, what minimizes their transmission.Diplôme : Magistère En ligne : ../theses/physique/ADN4465.pdf Permalink : index.php?lvl=notice_display&id=3597 Caractéristiques optiques et structurales des couches minces de titane obtenues par voie Sol-Gel [texte imprimé] / Dounia Adnane ; Rabah Bensaha, Directeur de thèse . - Constantine : Université Mentouri Constantine, 2005 . - 103 f.
01 Disponible à la salle de recherche 02 Disponibles au magazin de la B.U.C. 01 CD
Langues : Français (fre)
Catégories : Français - Anglais
PhysiqueTags : Couches minces Sol-gel Oxyde de titane Index. décimale : 530 Physique Résumé : TiO2 thin films were prepared on glass and ITO substrate by sol–gel process. Their structural and optical properties were examined of different steeping at various calcination temperatures. The films were characterized with X-ray Diffractométre, DSC, fluorescence X spectroscopy, UV-VISIBLE spectroscopy, optical microscopy and Fourier transform infrared spectroscopy (FTIR). The XRD
patterns show that the xerogel of TiO2 are amorphous, and they transform into the anatase phase from 350°C, and we notice the appearance of the phase brookite after 400°C. In the case of the sample obtained with 400°C and 10 steepings , we
observe the appearance of the phase rutile , normally this one must appear with
800°C. The crystallite size of TiO2 thin films is increased with increasing
calcination temperature. The color of the thin layers obtained varies according to
the temperature of annealing and of the number of steeping. The thickness varies
between 20–285nm. The thermal analysis of the powder shows that the
crystallization of TiO2 is from 400°C. The thin layers of TiO2 are transparent in the
visible and opaque in UV, and this some are the temperature of annealing and the
number of steeping. The increase in the number of steeping returns the layers
opaque, what minimizes their transmission.Diplôme : Magistère En ligne : ../theses/physique/ADN4465.pdf Permalink : index.php?lvl=notice_display&id=3597 Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité ADN/4465 ADN/4465 Thèse Bibliothèque principale Thèses Disponible Elaboration et caractérisation des couches minces de matériau CZTS (Cu2ZnSnS4) obtenues par voie sol gel / Mohamed Cherif Benachour
![]()
Titre : Elaboration et caractérisation des couches minces de matériau CZTS (Cu2ZnSnS4) obtenues par voie sol gel : Applications a la photovoltaïque. Type de document : texte imprimé Auteurs : Mohamed Cherif Benachour, Auteur ; Rabah Bensaha, Directeur de thèse Mention d'édition : 05/11/2020 Editeur : جامعة الإخوة منتوري قسنطينة Année de publication : 2020 Importance : 122 f. Format : 30 cm. Note générale : 1 copies imprimées disponibles
Langues : Français (fre) Catégories : Français - Anglais
PhysiqueTags : physique: sciences des matériaux sciences des matériaux:Céramique CZTS dip-coating sol gel DRX cellule solaire solar cell PL طلاء بالغمس سائل الهلام ،خلية شمسية الاستضاءة الضوئية Index. décimale : 530 Physique Résumé :
Recently, considerable work has been done on the Cu2ZnSnS4 (CZTS) quaternary compound semiconductor, due to its simplicity, low cost and above all its flexibility in the combination of several chemical compounds, to make it a good absorbent layer for thin film solar cells and thermoelectric energy generator. CZTS thin films are a kind of p-type direct band gap semiconductor with a band gap value of Eg ≈ 1.5 eV for photoelectric energy conversion and are characterized by a large absorption coefficient (> 104 cm - 1). In this way, the aim of the present work is to study the parameters of the annealing temperature and optimal annealing time for the formation of pure CZTS thin layer. For this, we have developed a simple and non-toxic sulfur-free process using the sol gel process and the vacuum channels to prepare the thin layers of pure CZTS phase deposited on glass substrates by dip-coating technique and annealed at different temperatures. and different annealing times. We studied the effect of annealing temperature on the optical properties of CZTS thin films. The last ones were deposited by dip-coating technique using the sol-gel method. They found that increasing the annealing temperature from 200 to 500 °C for one hour (1h) reduced
the energy gap from 1.72 to 1.50 eV. So, they judged that these thin layers are good for solar cells. Consideration of these results prompted us to study the effect of the annealing time from 5 to 60 min on the properties of CZTS thin films. The samples obtained were studied by several techniques such as XRD, Raman spectroscopy, SEM, Atomic force microscopy (AFM), UV-vis spectroscopy and photoluminescence. Confirmed by Raman spectroscopy, XRD analysis reveals the formation of a single-phase Cu2ZnSnS4 compound, of quasistoichiometric composition, in the tetragonal structure of kesterite with a preferential orientation along the direction [112]. The grain size tends to increase as the duration of the annealing increases and the temperature of the annealing also increases, a result confirmed by SEM. The study of the morphology by SEM and AFM confirms that the thin films thus produced are homogeneous, without cracking, of nanometric structure and having a very low roughness (of the order of 1 nm). Optical measurements analysis reveals that the layers have a relatively high absorption coefficient in the visible spectrum with a range gap of 1.62−1.50 eV, which is somewhat close to the optimal value of the solar cell. The Luminous Spectra (PL) shows broad bands with a limited intensity of a maximum between 1.62 and 1.50 eV, corresponding to the optical range gap of CZTS and increasing with the annealing time. The study of electrical properties using I(V) also showed that increasing annealing time improves the electrical properties of the structure. In addition, we examined the problem of secondary phases and suggested a way to avoid its formation.
Note de contenu :
Annexes.Diplôme : Doctorat en sciences En ligne : ../theses/physique/BEN7667.pdf Format de la ressource électronique : Permalink : index.php?lvl=notice_display&id=11501 Elaboration et caractérisation des couches minces de matériau CZTS (Cu2ZnSnS4) obtenues par voie sol gel : Applications a la photovoltaïque. [texte imprimé] / Mohamed Cherif Benachour, Auteur ; Rabah Bensaha, Directeur de thèse . - 05/11/2020 . - جامعة الإخوة منتوري قسنطينة, 2020 . - 122 f. ; 30 cm.
1 copies imprimées disponibles
Langues : Français (fre)
Catégories : Français - Anglais
PhysiqueTags : physique: sciences des matériaux sciences des matériaux:Céramique CZTS dip-coating sol gel DRX cellule solaire solar cell PL طلاء بالغمس سائل الهلام ،خلية شمسية الاستضاءة الضوئية Index. décimale : 530 Physique Résumé :
Recently, considerable work has been done on the Cu2ZnSnS4 (CZTS) quaternary compound semiconductor, due to its simplicity, low cost and above all its flexibility in the combination of several chemical compounds, to make it a good absorbent layer for thin film solar cells and thermoelectric energy generator. CZTS thin films are a kind of p-type direct band gap semiconductor with a band gap value of Eg ≈ 1.5 eV for photoelectric energy conversion and are characterized by a large absorption coefficient (> 104 cm - 1). In this way, the aim of the present work is to study the parameters of the annealing temperature and optimal annealing time for the formation of pure CZTS thin layer. For this, we have developed a simple and non-toxic sulfur-free process using the sol gel process and the vacuum channels to prepare the thin layers of pure CZTS phase deposited on glass substrates by dip-coating technique and annealed at different temperatures. and different annealing times. We studied the effect of annealing temperature on the optical properties of CZTS thin films. The last ones were deposited by dip-coating technique using the sol-gel method. They found that increasing the annealing temperature from 200 to 500 °C for one hour (1h) reduced
the energy gap from 1.72 to 1.50 eV. So, they judged that these thin layers are good for solar cells. Consideration of these results prompted us to study the effect of the annealing time from 5 to 60 min on the properties of CZTS thin films. The samples obtained were studied by several techniques such as XRD, Raman spectroscopy, SEM, Atomic force microscopy (AFM), UV-vis spectroscopy and photoluminescence. Confirmed by Raman spectroscopy, XRD analysis reveals the formation of a single-phase Cu2ZnSnS4 compound, of quasistoichiometric composition, in the tetragonal structure of kesterite with a preferential orientation along the direction [112]. The grain size tends to increase as the duration of the annealing increases and the temperature of the annealing also increases, a result confirmed by SEM. The study of the morphology by SEM and AFM confirms that the thin films thus produced are homogeneous, without cracking, of nanometric structure and having a very low roughness (of the order of 1 nm). Optical measurements analysis reveals that the layers have a relatively high absorption coefficient in the visible spectrum with a range gap of 1.62−1.50 eV, which is somewhat close to the optimal value of the solar cell. The Luminous Spectra (PL) shows broad bands with a limited intensity of a maximum between 1.62 and 1.50 eV, corresponding to the optical range gap of CZTS and increasing with the annealing time. The study of electrical properties using I(V) also showed that increasing annealing time improves the electrical properties of the structure. In addition, we examined the problem of secondary phases and suggested a way to avoid its formation.
Note de contenu :
Annexes.Diplôme : Doctorat en sciences En ligne : ../theses/physique/BEN7667.pdf Format de la ressource électronique : Permalink : index.php?lvl=notice_display&id=11501 Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité BEN/7667 BEN/7667 Thèse Bibliothèque principale Thèses Disponible Elaboration et caractérisation des couches minces nanostructurées d'oxyde de titane(TiO2)dopées et non dopées avec le ZrO2et le ZnO,obtenues par voie sol-gel. / Hanene Bensouyad
![]()
Titre : Elaboration et caractérisation des couches minces nanostructurées d'oxyde de titane(TiO2)dopées et non dopées avec le ZrO2et le ZnO,obtenues par voie sol-gel. Type de document : texte imprimé Auteurs : Hanene Bensouyad, Auteur ; Rabah Bensaha, Directeur de thèse Editeur : Constantine : Université Mentouri Constantine Année de publication : 2011 Importance : 167 f. Format : 31 cm Note générale : Doctorat en sciences
2 copies imprimées disponiblesLangues : Français (fre) Catégories : Français - Anglais
PhysiqueTags : Sol-Gel Couches minces TiO2 TiO2dopé ZrO2 TiO2dopé ZnO anatase brookite. Index. décimale : 530 Physique Diplôme : Doctorat en sciences En ligne : ../theses/physique/BEN5991.pdf Format de la ressource électronique : Permalink : index.php?lvl=notice_display&id=5907 Elaboration et caractérisation des couches minces nanostructurées d'oxyde de titane(TiO2)dopées et non dopées avec le ZrO2et le ZnO,obtenues par voie sol-gel. [texte imprimé] / Hanene Bensouyad, Auteur ; Rabah Bensaha, Directeur de thèse . - Constantine : Université Mentouri Constantine, 2011 . - 167 f. ; 31 cm.
Doctorat en sciences
2 copies imprimées disponibles
Langues : Français (fre)
Catégories : Français - Anglais
PhysiqueTags : Sol-Gel Couches minces TiO2 TiO2dopé ZrO2 TiO2dopé ZnO anatase brookite. Index. décimale : 530 Physique Diplôme : Doctorat en sciences En ligne : ../theses/physique/BEN5991.pdf Format de la ressource électronique : Permalink : index.php?lvl=notice_display&id=5907 Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité BEN/5991 BEN/5991 Thèse Bibliothèque principale Thèses Disponible Elaboration et caractérisation des couches minces d'oxyde de silicium obtenues par voie sol gel / Mourad Attallah
![]()
Titre : Elaboration et caractérisation des couches minces d'oxyde de silicium obtenues par voie sol gel Type de document : texte imprimé Auteurs : Mourad Attallah ; Univ. de Constantine, Éditeur scientifique ; Rabah Bensaha, Directeur de thèse Année de publication : 2010 Importance : 87 f. Note générale : 01 Disponible à la salle de recherche 01 Disponible au magazin de la B.U.C. 01 CD Langues : Français (fre) Catégories : Français - Anglais
PhysiqueTags : Couches minces Oxyde de silicium Index. décimale : 530 Physique En ligne : ../theses/physique/ATT5604.pdf Permalink : index.php?lvl=notice_display&id=3402 Elaboration et caractérisation des couches minces d'oxyde de silicium obtenues par voie sol gel [texte imprimé] / Mourad Attallah ; Univ. de Constantine, Éditeur scientifique ; Rabah Bensaha, Directeur de thèse . - 2010 . - 87 f.
01 Disponible à la salle de recherche 01 Disponible au magazin de la B.U.C. 01 CD
Langues : Français (fre)
Catégories : Français - Anglais
PhysiqueTags : Couches minces Oxyde de silicium Index. décimale : 530 Physique En ligne : ../theses/physique/ATT5604.pdf Permalink : index.php?lvl=notice_display&id=3402 Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité ATT/5604 ATT/5604 Thèse Bibliothèque principale Thèses Disponible Elaboration et caractérisation des couches minces de TiO2 dopées à l’erbium, à différentes températures et épaisseurs / Mohamed Cherif Benachour
![]()
Titre : Elaboration et caractérisation des couches minces de TiO2 dopées à l’erbium, à différentes températures et épaisseurs Type de document : texte imprimé Auteurs : Mohamed Cherif Benachour, Auteur ; Rabah Bensaha, Directeur de thèse Editeur : Constantine : Université Mentouri Constantine Année de publication : 2011 Importance : 104 f. Format : 31 cm. Note générale : Magister
2 copies imprimées disponiblesLangues : Français (fre) Catégories : Français - Anglais
PhysiqueTags : TiO2 Couches Minces Er3+ Sol-Gel anatase Brookite rutile Er2Ti2O7 Er2TiO5 Er2O3 Index. décimale : 530 Physique En ligne : ../theses/physique/BEN6133.pdf Format de la ressource électronique : Permalink : index.php?lvl=notice_display&id=6002 Elaboration et caractérisation des couches minces de TiO2 dopées à l’erbium, à différentes températures et épaisseurs [texte imprimé] / Mohamed Cherif Benachour, Auteur ; Rabah Bensaha, Directeur de thèse . - Constantine : Université Mentouri Constantine, 2011 . - 104 f. ; 31 cm.
Magister
2 copies imprimées disponibles
Langues : Français (fre)
Catégories : Français - Anglais
PhysiqueTags : TiO2 Couches Minces Er3+ Sol-Gel anatase Brookite rutile Er2Ti2O7 Er2TiO5 Er2O3 Index. décimale : 530 Physique En ligne : ../theses/physique/BEN6133.pdf Format de la ressource électronique : Permalink : index.php?lvl=notice_display&id=6002 Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité BEN/6133 BEN/6133 Thèse Bibliothèque principale Thèses Disponible Élaboration et caractérisation des matériaux pour la photocatalyse, obtenus par la voie Sol-Gel. / Ouidad Beldjebli
![]()
PermalinkÉlaboration et caractérisation des systèmes [SiO2/(TiO2 non dopé)] et [SiO2/TiO2 dopé Ni)]obtenus par voie sol-gel / Hichem Sedrati
![]()
PermalinkEtude de l'influence de la concentration du cobalt sur les propriétés physico-chimiques des couches minces de TiO2 , obtenues par voie sol-gel / Badreddine Toubal
![]()
PermalinkEtude de l’influence des effets des elements lourds sur les proprietes physique des couches minces de TIO2 / Fouzia Abbas
![]()
PermalinkEtude de l'influence des éléments ferromagnétiques sur les propriétés physiques des couches minces de Ti02 / Badreddine Toubal
![]()
PermalinkEtude de l’influence de terre rare (Er3+) sur les propriétés structurales, optiques et magnétiques des couches minces et xérogels de TiO2. / Heider Dehdouh
![]()
PermalinkEtude des proprietés physiques des couches minces et des poudres du SiO2 dopées au Cobalt / Khaled Chettah
![]()
PermalinkEtude des propriétés structurales et optiques des couches minces de Tio2 ,obtenues par voie sol-gel sur différents substrats / Raouf Mechiakh
![]()
PermalinkInfluence de la proportion de phases dans le domaine de temperatures (400°C-1000°C) sur des films de Ti et de Cr,déposés sur des substrats en aciers / Rachid Gheriani
![]()
PermalinkPropriétés physico-chimiques des couches minces de l'oxyde de titane.Effet de la concentration / Heider Dehdouh
![]()
Permalink