Détail de l'indexation
620 : Génie Mécanique |
Ouvrages de la bibliothèque en indexation 620 (360)


Analyse et modélisation du comportement mécanique des materiaux orthotropes intélligents sous diverses sollicitations / Abdelaziz Lebied
![]()
Titre : Analyse et modélisation du comportement mécanique des materiaux orthotropes intélligents sous diverses sollicitations Type de document : texte imprimé Auteurs : Abdelaziz Lebied ; Univ. de Constantine, Éditeur scientifique ; B. Necib, Directeur de thèse Année de publication : 2008 Importance : 121 f. Note générale : 01 Disponible à la salle de recherche 02 Disponibles au magazin de la B.U.C. 01 CD Langues : Français (fre) Catégories : Français - Anglais
Génie MécaniqueTags : Modélisation Materiaux orthotropes intélligents Sollicitations Index. décimale : 620 Génie Mécanique Diplôme : Magistère En ligne : ../theses/gmecanique/LeB5154.pdf Permalink : index.php?lvl=notice_display&id=871 Analyse et modélisation du comportement mécanique des materiaux orthotropes intélligents sous diverses sollicitations [texte imprimé] / Abdelaziz Lebied ; Univ. de Constantine, Éditeur scientifique ; B. Necib, Directeur de thèse . - 2008 . - 121 f.
01 Disponible à la salle de recherche 02 Disponibles au magazin de la B.U.C. 01 CD
Langues : Français (fre)
Catégories : Français - Anglais
Génie MécaniqueTags : Modélisation Materiaux orthotropes intélligents Sollicitations Index. décimale : 620 Génie Mécanique Diplôme : Magistère En ligne : ../theses/gmecanique/LeB5154.pdf Permalink : index.php?lvl=notice_display&id=871 Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité LEB/5154 LEB/5154 Thèse Bibliothèque principale Thèses Disponible Analyse et modélisation des fissurations dans les plaques trouées sous l’effet des conditions extérieures. / Sofiane Chorfi
![]()
Titre : Analyse et modélisation des fissurations dans les plaques trouées sous l’effet des conditions extérieures. Type de document : texte imprimé Auteurs : Sofiane Chorfi, Auteur ; Brahim Necib, Directeur de thèse Mention d'édition : 27/01/2021 Editeur : جامعة الإخوة منتوري قسنطينة Année de publication : 2021 Importance : 142 f. Format : 30 cm. Note générale : 1 copies imprimées disponibles
Langues : Français (fre) Catégories : Français - Anglais
Génie MécaniqueTags : G. Mécanique:Construction mécanique Plaques trouées trous circulaires trous elliptiques fissuration facteurs d’intensités de contraintes modes de rupture méthodes numériques conditions extérieures Holed plates circular holes elliptical holes cracking intensity stress factors breaking modes numerical methods external conditions الألواح مثقوبة ثقب دائریة ثقب بیضاویة الشكل، تكسیر عوامل شدة الإجھاد طرق التكسر أسالیب حسابیة ظروف خارجیة Index. décimale : 620 Génie Mécanique Résumé :
The problem of cracks in continuous structures such as plates, beams, bars, trellis or hulls is often very apparent around riveting holes, notches or other connecting leaves. In fact, the holed plates assembled by riveting or bolted are of great importance in the fields of applications of mechanics, aeronautics, aerospace and civil engineering and they can be the object of considerable cracking around their holes. The presence of these cracks leads to a weakening of the structure as a result of concentrations of local stresses or deformations that can decrease their lifespan or even cause their total rupture or their disaster. These stress concentrators are often unavoidable due to the effect of external conditions such as: forces, stresses, temperature changes, humidity and others. It is therefore necessary to know these stress intensity factors associated with each geometrical plate, in order to analyse its state of stress and strain state as well as its cracking modes which can be according to modes I, II and III or mixed mode. The analysis of the propagation of cracks in industrial plate structures leads to evaluating their lifespan before their sudden rupture. In our work consists of the static and dynamic analysis of the propagation cracks around circular, elliptical holes and other shapes in thin 2D (two-dimensional) aluminum plates under the effect of external applied forces. The starting position of the hole is defined by a point on the edge of the hole and the angle of inclination with respect to the orthonormal axis (X, Y) whose center is the center of the hole. As well as the inclination of the load (mixed mode). Consequently, a calculation strategy is implemented based on the “special quarter point” finite element method involving the BEM and XFEM approach using ANSYS and ABAQUS software. The results obtained are allowed to define the modes of cracking in the holes of the plates. The values of the factor of stress intensities corresponding to each mode of cracking under the effect of external conditions such as the loading in mode I or in mixed mode were determined for the various calculation methods used and good agreement with the results. Analytical have been noticed. The numerical results are compared with the experimental results and good results have been observed. These stress concentrations are found in the vicinity of the holes which generate a plastic zone influencing the propagation path of the crack, which is advisable to distance the drilling of holes in the plates in order to avoid their easy ruptures and to increase their lifetime.
Diplôme : Doctorat en sciences En ligne : ../theses/gmecanique/CHO7725.pdf Format de la ressource électronique : Permalink : index.php?lvl=notice_display&id=11559 Analyse et modélisation des fissurations dans les plaques trouées sous l’effet des conditions extérieures. [texte imprimé] / Sofiane Chorfi, Auteur ; Brahim Necib, Directeur de thèse . - 27/01/2021 . - جامعة الإخوة منتوري قسنطينة, 2021 . - 142 f. ; 30 cm.
1 copies imprimées disponibles
Langues : Français (fre)
Catégories : Français - Anglais
Génie MécaniqueTags : G. Mécanique:Construction mécanique Plaques trouées trous circulaires trous elliptiques fissuration facteurs d’intensités de contraintes modes de rupture méthodes numériques conditions extérieures Holed plates circular holes elliptical holes cracking intensity stress factors breaking modes numerical methods external conditions الألواح مثقوبة ثقب دائریة ثقب بیضاویة الشكل، تكسیر عوامل شدة الإجھاد طرق التكسر أسالیب حسابیة ظروف خارجیة Index. décimale : 620 Génie Mécanique Résumé :
The problem of cracks in continuous structures such as plates, beams, bars, trellis or hulls is often very apparent around riveting holes, notches or other connecting leaves. In fact, the holed plates assembled by riveting or bolted are of great importance in the fields of applications of mechanics, aeronautics, aerospace and civil engineering and they can be the object of considerable cracking around their holes. The presence of these cracks leads to a weakening of the structure as a result of concentrations of local stresses or deformations that can decrease their lifespan or even cause their total rupture or their disaster. These stress concentrators are often unavoidable due to the effect of external conditions such as: forces, stresses, temperature changes, humidity and others. It is therefore necessary to know these stress intensity factors associated with each geometrical plate, in order to analyse its state of stress and strain state as well as its cracking modes which can be according to modes I, II and III or mixed mode. The analysis of the propagation of cracks in industrial plate structures leads to evaluating their lifespan before their sudden rupture. In our work consists of the static and dynamic analysis of the propagation cracks around circular, elliptical holes and other shapes in thin 2D (two-dimensional) aluminum plates under the effect of external applied forces. The starting position of the hole is defined by a point on the edge of the hole and the angle of inclination with respect to the orthonormal axis (X, Y) whose center is the center of the hole. As well as the inclination of the load (mixed mode). Consequently, a calculation strategy is implemented based on the “special quarter point” finite element method involving the BEM and XFEM approach using ANSYS and ABAQUS software. The results obtained are allowed to define the modes of cracking in the holes of the plates. The values of the factor of stress intensities corresponding to each mode of cracking under the effect of external conditions such as the loading in mode I or in mixed mode were determined for the various calculation methods used and good agreement with the results. Analytical have been noticed. The numerical results are compared with the experimental results and good results have been observed. These stress concentrations are found in the vicinity of the holes which generate a plastic zone influencing the propagation path of the crack, which is advisable to distance the drilling of holes in the plates in order to avoid their easy ruptures and to increase their lifetime.
Diplôme : Doctorat en sciences En ligne : ../theses/gmecanique/CHO7725.pdf Format de la ressource électronique : Permalink : index.php?lvl=notice_display&id=11559 Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité CHO/7725 CHO/7725 Thèse Bibliothèque principale Thèses Disponible Analyse et modèlisation numérique du comportement mécanique d'un diaphragme deprimogene / Rassim Belakroum
Titre : Analyse et modèlisation numérique du comportement mécanique d'un diaphragme deprimogene Type de document : texte imprimé Auteurs : Rassim Belakroum ; Mahfoud Kadja, Directeur de thèse ; Univ. de Constantine, Éditeur scientifique Année de publication : 1998 Importance : 84 f. Note générale : 1 Exp Disponible dans la salle de recherche
2 Exp Disponibles au magasin de la bibliothèque centraleLangues : Français (fre) Catégories : Français - Anglais
Génie MécaniqueTags : Modélisation Diaphragme Index. décimale : 620 Génie Mécanique Permalink : index.php?lvl=notice_display&id=818 Analyse et modèlisation numérique du comportement mécanique d'un diaphragme deprimogene [texte imprimé] / Rassim Belakroum ; Mahfoud Kadja, Directeur de thèse ; Univ. de Constantine, Éditeur scientifique . - 1998 . - 84 f.
1 Exp Disponible dans la salle de recherche
2 Exp Disponibles au magasin de la bibliothèque centrale
Langues : Français (fre)
Catégories : Français - Anglais
Génie MécaniqueTags : Modélisation Diaphragme Index. décimale : 620 Génie Mécanique Permalink : index.php?lvl=notice_display&id=818 Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité BEL/3111 BEL/3111 Thèse Bibliothèque principale Thèses Disponible Analyse et modélisation numerique des déformations élastiques des poutres en matériaux Piézo - Laminés / Abdelaziz Lebied
![]()
Titre : Analyse et modélisation numerique des déformations élastiques des poutres en matériaux Piézo - Laminés Type de document : texte imprimé Auteurs : Abdelaziz Lebied, Auteur ; Brahim Necib, Directeur de thèse Editeur : جامعة الإخوة منتوري قسنطينة Année de publication : 2017 Importance : 155 f. Format : 30 cm. Note générale : 2 copies imprimées disponibles
Langues : Français (fre) Catégories : Français - Anglais
Génie MécaniqueTags : matériau intelligent PZT potentiel électrique élasticité éléments finis intelligent PZT material electric potential elasticity finite elements المادة المركبة المادة الكهربائية الضغطية الذكية الكمون الكهربائي المرونة العناصر
المحدودةIndex. décimale : 620 Génie Mécanique Résumé : Currently, intelligent systems are a rapidly developing field and booming. They have a major
advantage: their adaptability to the environment, according to changing environmental conditions.
In this context, there is a surge of publications in this field since the early 80s. Since that time,
considerable efforts in basic research has been devoted to developing new adaptive structures. The
interest of these so-called smart structures is manifested by the fact that they provide optimal
extreme problems complex responses, such as micromanipulation of micro-objects whose size
ranges from a few microns to 1 mm, objects are the micro world.
.
We were able to obtain by numerical solutions using finite element method, a precise analysis of the
different modes of deformation of the piezoelectric beams, are an important aspect related to the
polarization of PZT beams. Was used in this study to extract the digital mode that interested us, the
bending mode in the plan and highlight the one hand, the effect of polarization, and on the other
hand, the mechanical properties and on operation of the piezoelectric micro-clamp suitable to secure
the plug and removal of micro-objects of any shape. We then corroborated with any benchmarking
to compare the three studies (analytical, numerical and experimental) for validation.Diplôme : Doctorat en sciences En ligne : ../theses/gmecanique/LEB7117.pdf Format de la ressource électronique : Permalink : index.php?lvl=notice_display&id=10484 Analyse et modélisation numerique des déformations élastiques des poutres en matériaux Piézo - Laminés [texte imprimé] / Abdelaziz Lebied, Auteur ; Brahim Necib, Directeur de thèse . - جامعة الإخوة منتوري قسنطينة, 2017 . - 155 f. ; 30 cm.
2 copies imprimées disponibles
Langues : Français (fre)
Catégories : Français - Anglais
Génie MécaniqueTags : matériau intelligent PZT potentiel électrique élasticité éléments finis intelligent PZT material electric potential elasticity finite elements المادة المركبة المادة الكهربائية الضغطية الذكية الكمون الكهربائي المرونة العناصر
المحدودةIndex. décimale : 620 Génie Mécanique Résumé : Currently, intelligent systems are a rapidly developing field and booming. They have a major
advantage: their adaptability to the environment, according to changing environmental conditions.
In this context, there is a surge of publications in this field since the early 80s. Since that time,
considerable efforts in basic research has been devoted to developing new adaptive structures. The
interest of these so-called smart structures is manifested by the fact that they provide optimal
extreme problems complex responses, such as micromanipulation of micro-objects whose size
ranges from a few microns to 1 mm, objects are the micro world.
.
We were able to obtain by numerical solutions using finite element method, a precise analysis of the
different modes of deformation of the piezoelectric beams, are an important aspect related to the
polarization of PZT beams. Was used in this study to extract the digital mode that interested us, the
bending mode in the plan and highlight the one hand, the effect of polarization, and on the other
hand, the mechanical properties and on operation of the piezoelectric micro-clamp suitable to secure
the plug and removal of micro-objects of any shape. We then corroborated with any benchmarking
to compare the three studies (analytical, numerical and experimental) for validation.Diplôme : Doctorat en sciences En ligne : ../theses/gmecanique/LEB7117.pdf Format de la ressource électronique : Permalink : index.php?lvl=notice_display&id=10484 Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité LEB/7117 LEB/7117 Thèse Bibliothèque principale Thèses Disponible Analyse du mouvement d'un bras du corps humain sous diverses sollicitations par la méthode des éléments finis / Fouad Guerdouh
![]()
Titre : Analyse du mouvement d'un bras du corps humain sous diverses sollicitations par la méthode des éléments finis Type de document : texte imprimé Auteurs : Fouad Guerdouh, Auteur ; Brahim Necib, Directeur de thèse Editeur : Constantine : Université Mentouri Constantine Année de publication : 2009 Importance : 100 f. Format : 31 cm Note générale : Magister
2 copies imprimées disponiblesLangues : Français (fre) Catégories : Français - Anglais
Génie MécaniqueTags : Mouvement Elements finis Corps humain Index. décimale : 620 Génie Mécanique Diplôme : Magistère En ligne : ../theses/gmecanique/GUE5564.pdf Format de la ressource électronique : Permalink : index.php?lvl=notice_display&id=689 Analyse du mouvement d'un bras du corps humain sous diverses sollicitations par la méthode des éléments finis [texte imprimé] / Fouad Guerdouh, Auteur ; Brahim Necib, Directeur de thèse . - Constantine : Université Mentouri Constantine, 2009 . - 100 f. ; 31 cm.
Magister
2 copies imprimées disponibles
Langues : Français (fre)
Catégories : Français - Anglais
Génie MécaniqueTags : Mouvement Elements finis Corps humain Index. décimale : 620 Génie Mécanique Diplôme : Magistère En ligne : ../theses/gmecanique/GUE5564.pdf Format de la ressource électronique : Permalink : index.php?lvl=notice_display&id=689 Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité GUE/5564 GUE/5564 Thèse Bibliothèque principale Thèses Disponible Analyse non linéaire de la flexion et de stabilités des plaques minces rectangulaires / Samir Bounneche
PermalinkAnalyse numerique du comportement dynamique de structures composites a renforcement fibreux / Lynda Bouyaya
![]()
PermalinkAnalyse of Dispersion and deposition of small particles in isotropic and sheared turbulent flows / Ounis Hadj
PermalinkPermalinkPermalinkAnalyse des plaques composites carbone/époxyde sous l'effet des efforts de per?age / Driss Bendjaballah
![]()
PermalinkPermalinkPermalinkPermalinkPermalinkAnalyse tribologique et thermique d'un materiau composite carbone-carbone dans un contact électrique / Abdeldjalil Benfoughal
![]()
PermalinkPermalinkApplication de la méthode des éléments finis à l'équation de la diffusion de chaleur en régime stationnaire et variable "cas bidimensionnel et axisymétrique " / Abdelmoumen Hakim Benmachiche
PermalinkApplication de la methode des éléments finis de frontière à la lubrification thermo-hydrodynamique / Im?aoudene Benyoucef
PermalinkApplication du théorème variationnel de Helinger- Reissner à la méthode des éléments finis pour l'évaluation de contraintes à l'interface de matériaux composites / Benabdellah Chouchaoui
Permalink