Résultat de la recherche
3 résultat(s) recherche sur le tag 'thermique' 
Affiner la recherche Générer le flux rss de la recherche
Partager le résultat de cette recherche Interroger des sources externes
Titre : Contribution à l'étude thermique et hydraulique d'un canal plan corrugue Type de document : texte imprimé Auteurs : Rahima Benchabi ; M. Kadja, Directeur de thèse ; Université de Constantine, Editeur scientifique Année de publication : 1997 Importance : 98 f. Note générale : 02 Disponibles au magasin de la bibliothèque centrale
01 Disponible à la salle de rechercheLangues : Français (fre) Catégories : Français - Anglais
PhysiqueTags : Hydraulique Thermique Plan corrugue Index. décimale : 530 Physique Permalink : https://bu.umc.edu.dz/md/index.php?lvl=notice_display&id=2937 Contribution à l'étude thermique et hydraulique d'un canal plan corrugue [texte imprimé] / Rahima Benchabi ; M. Kadja, Directeur de thèse ; Université de Constantine, Editeur scientifique . - 1997 . - 98 f.
02 Disponibles au magasin de la bibliothèque centrale
01 Disponible à la salle de recherche
Langues : Français (fre)
Catégories : Français - Anglais
PhysiqueTags : Hydraulique Thermique Plan corrugue Index. décimale : 530 Physique Permalink : https://bu.umc.edu.dz/md/index.php?lvl=notice_display&id=2937 Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité BEN/2998 BEN/2998 Thèse Bibliothèque principale Thèses Disponible Modélisation nanothermique des systèmes Thermo/Photovoltaïques Applications aux collecteurs hybrides PVT / Hanane Ben Cheikh El houcine
Titre : Modélisation nanothermique des systèmes Thermo/Photovoltaïques Applications aux collecteurs hybrides PVT Type de document : texte imprimé Auteurs : Hanane Ben Cheikh El houcine, Auteur ; Khaled Touafek, Directeur de thèse ; Fouad Kerrour, Directeur de thèse Editeur : جامعة الإخوة منتوري قسنطينة Année de publication : 2017 Importance : 129 f. Format : 30 cm. Note générale : 2 copies imprimées disponibles
Langues : Français (fre) Catégories : Français - Anglais
ElectroniqueTags : Module PV photovoltaique Thermique Photovoltaique-thermique PVT méthode des élements finis COMSOL Rendement PV module photovoltaic Thermal Photovoltaic-thermal PVT finite element method Efficiency ???? ??????????? ?????????? ?????? ??????? ?????? ?????? (PVT ) ????? ???????
??????? ???????Index. décimale : 621 Electronique Résumé : The PVT coupling is to combine a photovoltaic (PV) to a thermal heating system (heat sensor), such a system allows to improve the efficiency of the PV module (negative effect of decreased temperature) while extracting heat calories useful heating.
The objective of this study was to evaluate the energy performance of a new hybrid photovoltaic thermal sensor (PV/T) based on a new configuration of the absorber developed within the Unit for Applied Renewable Energy. The study is done as follows; modeling the energy performance of the hybrid prototype MATLAB in one dimension in dynamic mode.
And seen to predict the performance of the system in real conditions a digital 3D simulation with commercial software has been implemented, our choice fell on the Comsol Multiphysics software.
Model validation was performed experimentally; the simulation results are in good agreement with experimental measurements. The advantage of such a structure is the simplicity of implementation by contribution to the model of PV/T tube and energy saving improvement comparing to that in the model PV/T vessel, not to mention the lower cost resulting from the use of galvanizing steel in the manufacture of the absorber compared to copper.
A numerical approach of a second new configuration of PV/T hybrid collector was established under COMSOL to confirm the feasibility of such a design. From the simulation results, we find that this second PVT configuration can effectively reduce the temperature of the photovoltaic module and consequently improve the electrical performance.
Diplôme : Doctorat en sciences En ligne : ../theses/electronique/BEN6993.pdf Format de la ressource électronique : Permalink : https://bu.umc.edu.dz/md/index.php?lvl=notice_display&id=10401 Modélisation nanothermique des systèmes Thermo/Photovoltaïques Applications aux collecteurs hybrides PVT [texte imprimé] / Hanane Ben Cheikh El houcine, Auteur ; Khaled Touafek, Directeur de thèse ; Fouad Kerrour, Directeur de thèse . - [S.l.] : جامعة الإخوة منتوري قسنطينة, 2017 . - 129 f. ; 30 cm.
2 copies imprimées disponibles
Langues : Français (fre)
Catégories : Français - Anglais
ElectroniqueTags : Module PV photovoltaique Thermique Photovoltaique-thermique PVT méthode des élements finis COMSOL Rendement PV module photovoltaic Thermal Photovoltaic-thermal PVT finite element method Efficiency ???? ??????????? ?????????? ?????? ??????? ?????? ?????? (PVT ) ????? ???????
??????? ???????Index. décimale : 621 Electronique Résumé : The PVT coupling is to combine a photovoltaic (PV) to a thermal heating system (heat sensor), such a system allows to improve the efficiency of the PV module (negative effect of decreased temperature) while extracting heat calories useful heating.
The objective of this study was to evaluate the energy performance of a new hybrid photovoltaic thermal sensor (PV/T) based on a new configuration of the absorber developed within the Unit for Applied Renewable Energy. The study is done as follows; modeling the energy performance of the hybrid prototype MATLAB in one dimension in dynamic mode.
And seen to predict the performance of the system in real conditions a digital 3D simulation with commercial software has been implemented, our choice fell on the Comsol Multiphysics software.
Model validation was performed experimentally; the simulation results are in good agreement with experimental measurements. The advantage of such a structure is the simplicity of implementation by contribution to the model of PV/T tube and energy saving improvement comparing to that in the model PV/T vessel, not to mention the lower cost resulting from the use of galvanizing steel in the manufacture of the absorber compared to copper.
A numerical approach of a second new configuration of PV/T hybrid collector was established under COMSOL to confirm the feasibility of such a design. From the simulation results, we find that this second PVT configuration can effectively reduce the temperature of the photovoltaic module and consequently improve the electrical performance.
Diplôme : Doctorat en sciences En ligne : ../theses/electronique/BEN6993.pdf Format de la ressource électronique : Permalink : https://bu.umc.edu.dz/md/index.php?lvl=notice_display&id=10401 Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité BEN/6993 BEN/6993 Thèse Bibliothèque principale Thèses Disponible
Titre : Production et performance des capteurs hybrides (PV/T) à eau intégrés dans le bâtiment : cas de l'Algérie Type de document : texte imprimé Auteurs : Chaouki Benbouza, Auteur ; Abdenacer Kaabi, Directeur de thèse Editeur : constantine [Algérie] : Université Constantine 1 Année de publication : 2014 Importance : 118 f. Format : 30 cm. Note générale : 2 copies imprimées disponibles
Langues : Français (fre) Catégories : Français - Anglais
Génie ClimatiqueTags : Capteur solaire hybride photovoltaïque rendement thermique solar collector hydrid photovoltaic performance thermal
????? ?????? ???? ???????? ???????Index. décimale : 626 Génie Climatique Résumé : The growing interest in the development of the concept of building positive energy for new or very high energy performance for rehabilitation is strongly linked to the global awareness of global warming by greenhouse effect and depletion of primary fossil resources (oil, gas, uranium). Various technological solutions have been there, introduced such as hybrid solar (PV / T) whose principle is to improve the performance of photovoltaic (PV) panels, for recovery of thermal energy they dissipate using a heat transfer fluid (in this case water).
The objective of this work is to find a mathematical model first to quantify solar irradiation at a place and on a given day, and has described the thermal behavior of PVT sensor to help determine its electrical performance and heat on a site in Constantine (Algeria). The results obtained show that an energy point of view or primary energy facilities incorporating PVT sensors are very promising and could be competitive in the face of solar systems using photovoltaic and thermal sensors installed separately. The performance evaluation criteria have to be further extended to environmental and economic aspects.
Diplôme : Magistère En ligne : ../theses/gclim/BEN6644.pdf Format de la ressource électronique : Permalink : https://bu.umc.edu.dz/md/index.php?lvl=notice_display&id=9797 Production et performance des capteurs hybrides (PV/T) à eau intégrés dans le bâtiment : cas de l'Algérie [texte imprimé] / Chaouki Benbouza, Auteur ; Abdenacer Kaabi, Directeur de thèse . - constantine (Route ain el bey, Algérie) : Université Constantine 1, 2014 . - 118 f. ; 30 cm.
2 copies imprimées disponibles
Langues : Français (fre)
Catégories : Français - Anglais
Génie ClimatiqueTags : Capteur solaire hybride photovoltaïque rendement thermique solar collector hydrid photovoltaic performance thermal
????? ?????? ???? ???????? ???????Index. décimale : 626 Génie Climatique Résumé : The growing interest in the development of the concept of building positive energy for new or very high energy performance for rehabilitation is strongly linked to the global awareness of global warming by greenhouse effect and depletion of primary fossil resources (oil, gas, uranium). Various technological solutions have been there, introduced such as hybrid solar (PV / T) whose principle is to improve the performance of photovoltaic (PV) panels, for recovery of thermal energy they dissipate using a heat transfer fluid (in this case water).
The objective of this work is to find a mathematical model first to quantify solar irradiation at a place and on a given day, and has described the thermal behavior of PVT sensor to help determine its electrical performance and heat on a site in Constantine (Algeria). The results obtained show that an energy point of view or primary energy facilities incorporating PVT sensors are very promising and could be competitive in the face of solar systems using photovoltaic and thermal sensors installed separately. The performance evaluation criteria have to be further extended to environmental and economic aspects.
Diplôme : Magistère En ligne : ../theses/gclim/BEN6644.pdf Format de la ressource électronique : Permalink : https://bu.umc.edu.dz/md/index.php?lvl=notice_display&id=9797 Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité BEN/6644 BEN/6644 Thèse Bibliothèque principale Thèses Disponible
