Résultat de la recherche
6 recherche sur le tag
'commande vectorielle' 
Affiner la recherche Générer le flux rss de la recherche
Partager le résultat de cette recherche Interroger des sources externes
Titre : Commandes adaptative et prédictive de la machine asynchrone Type de document : texte imprimé Auteurs : Salima Meziane, Auteur ; Hocine Benalla, Directeur de thèse Editeur : Constantine : Université Mentouri Constantine Année de publication : 2009 Importance : 172 p. Note générale : 01 Disponible à la salle de recherche 02 Disponibles au magazin de la B.U.C. 01 CD Langues : Français (fre) Catégories : Français - Anglais
Electro-techniqueTags : Machines électriques Machine asynchrone Commande vectorielle Commande adaptative Commande non linéaire Commande prédictive Induction motor Field oriented control Adaptive control Non linear control Predictive control آلة اللامتزامنة التحكم الشعاعي التحكم التوافقي التحكم غير الخطي التحكم التنبؤي Index. décimale : 622 Electro-Technique Résumé : The induction motor given a new technology perspective in many industries, due to their simple mechanical structure, easy maintenance and low cost. However its dynamic structure is very complex (system non-linear multi variable strongly coupled) makes his control is complicated requiring complex control algorithms. With the progress in power electronics associated with the appearance of fast components switches, caused significant changes in the design of systems control/regulators. This development has encouraged the emergence of various commands: Vector Control, non-linear and predictive control... etc The vector control has been in recent years towards the most important research and best suited to industrial requirements. However However, this structure requires the establishment of a sensor in rotor and is very sensitive in to parameters machine variations that induce loss of decoupling. The aim of this thesis in the first place is to present a multitude of alternative techniques to vector control, namely (sensorless control and adaptive control). Then the development of a high performance non-linear, predictive and adaptive predictive control applied to the induction motor, with the objective of this work is directed towards improving trajectory tracking capability, stability guarantee, robustness to parameters variations and disturbance rejection.Some numerical simulations tests are realised and the obtained results demonstrate the efficiency and the dynamic performances of the proposed strategy Diplôme : Doctorat en sciences En ligne : ../theses/electrotec/MEZ5398.pdf Format de la ressource électronique : Permalink : https://bu.umc.edu.dz/md/index.php?lvl=notice_display&id=388 Commandes adaptative et prédictive de la machine asynchrone [texte imprimé] / Salima Meziane, Auteur ; Hocine Benalla, Directeur de thèse . - Constantine : Université Mentouri Constantine, 2009 . - 172 p.
01 Disponible à la salle de recherche 02 Disponibles au magazin de la B.U.C. 01 CD
Langues : Français (fre)
Catégories : Français - Anglais
Electro-techniqueTags : Machines électriques Machine asynchrone Commande vectorielle Commande adaptative Commande non linéaire Commande prédictive Induction motor Field oriented control Adaptive control Non linear control Predictive control آلة اللامتزامنة التحكم الشعاعي التحكم التوافقي التحكم غير الخطي التحكم التنبؤي Index. décimale : 622 Electro-Technique Résumé : The induction motor given a new technology perspective in many industries, due to their simple mechanical structure, easy maintenance and low cost. However its dynamic structure is very complex (system non-linear multi variable strongly coupled) makes his control is complicated requiring complex control algorithms. With the progress in power electronics associated with the appearance of fast components switches, caused significant changes in the design of systems control/regulators. This development has encouraged the emergence of various commands: Vector Control, non-linear and predictive control... etc The vector control has been in recent years towards the most important research and best suited to industrial requirements. However However, this structure requires the establishment of a sensor in rotor and is very sensitive in to parameters machine variations that induce loss of decoupling. The aim of this thesis in the first place is to present a multitude of alternative techniques to vector control, namely (sensorless control and adaptive control). Then the development of a high performance non-linear, predictive and adaptive predictive control applied to the induction motor, with the objective of this work is directed towards improving trajectory tracking capability, stability guarantee, robustness to parameters variations and disturbance rejection.Some numerical simulations tests are realised and the obtained results demonstrate the efficiency and the dynamic performances of the proposed strategy Diplôme : Doctorat en sciences En ligne : ../theses/electrotec/MEZ5398.pdf Format de la ressource électronique : Permalink : https://bu.umc.edu.dz/md/index.php?lvl=notice_display&id=388 Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité MEZ/5398 MEZ/5398 Thèse Bibliothèque principale Thèses Disponible Contribution a l’etude des techniques de commande avancées de la machine asynchrone. / Assia Oukaci ép Mohand Oussaid
Titre : Contribution a l’etude des techniques de commande avancées de la machine asynchrone. Type de document : texte imprimé Auteurs : Assia Oukaci ép Mohand Oussaid, Auteur ; Riad Toufouti, Directeur de thèse Editeur : جامعة الإخوة منتوري قسنطينة Année de publication : 2018 Importance : 170 f. Format : 30 cm. Note générale : 2 copies imprimées disponibles
Langues : Français (fre) Catégories : Français - Anglais
Electro-techniqueTags : Moteur asynchrone à cage Génératrice asynchrone double alimentation commande vectorielle commande direct du couple Commande par linéarisation entré sortie Commande par mode glissant Energie
renouvelable Energie éolienne Squirrel cage induction generator Doubly fed induction generator Field oriented control Direct
torque control Input output linearisation control Sliding mode control Renewables energy wind energy المحرك اللاتزامني قفض السنجاب محرك اللاتزامني مزدوج التغذية التحكم الشعاعي التحكم المباشر للعزم التحكم اللاخطي التحكم الانزلاقي الطاقات المتجددة طاقة الرياحIndex. décimale : 622 Electro-Technique Résumé : The industry energy is currently facing many challenges. The mostimportant one concerns the use of conventional energy sources which have a direct impact on increasing global warming. With a view of reducing the emission of greenhouse gases, sharing renewable energy and increasing our energy efficiency by transforming energy and introducing clean renewable energies that are not implemented in the field of energy, electricity production is no longer a matter of choice it becamean obligation for nation’s energy policy. In this context, to increase the durability and efficiency of the electric switching system of renewable energy on the one hand, and to improve the quality of energy supplied on the other, the purpose of the work presented in this thesis is primarily the implementation of high-performance nonlinear control law on asynchronous machine, secondly the improvement of process paths with disturbance rejection and finally ensuring stability and maintaining the disconnection between flow and torque despite changes in machine parameters. The simulation resultsobtained for motor operation show that the nonlinear and sliding mode control have best dynamic performance compared to those obtained through the application ofother control techniques. The best dynamic performances of the sliding mode control wereconfirmed by the implementation of this technique intocontrol scheme of the active and reactive power of doubly fed induction generator driven by wind turbine.The simulation results confirmthe exact decoupling and good trajectory tracking of the active and reactive power.
Diplôme : Doctorat en sciences En ligne : ../theses/electrotec/OUK7326.pdf Format de la ressource électronique : Permalink : https://bu.umc.edu.dz/md/index.php?lvl=notice_display&id=10976 Contribution a l’etude des techniques de commande avancées de la machine asynchrone. [texte imprimé] / Assia Oukaci ép Mohand Oussaid, Auteur ; Riad Toufouti, Directeur de thèse . - جامعة الإخوة منتوري قسنطينة, 2018 . - 170 f. ; 30 cm.
2 copies imprimées disponibles
Langues : Français (fre)
Catégories : Français - Anglais
Electro-techniqueTags : Moteur asynchrone à cage Génératrice asynchrone double alimentation commande vectorielle commande direct du couple Commande par linéarisation entré sortie Commande par mode glissant Energie
renouvelable Energie éolienne Squirrel cage induction generator Doubly fed induction generator Field oriented control Direct
torque control Input output linearisation control Sliding mode control Renewables energy wind energy المحرك اللاتزامني قفض السنجاب محرك اللاتزامني مزدوج التغذية التحكم الشعاعي التحكم المباشر للعزم التحكم اللاخطي التحكم الانزلاقي الطاقات المتجددة طاقة الرياحIndex. décimale : 622 Electro-Technique Résumé : The industry energy is currently facing many challenges. The mostimportant one concerns the use of conventional energy sources which have a direct impact on increasing global warming. With a view of reducing the emission of greenhouse gases, sharing renewable energy and increasing our energy efficiency by transforming energy and introducing clean renewable energies that are not implemented in the field of energy, electricity production is no longer a matter of choice it becamean obligation for nation’s energy policy. In this context, to increase the durability and efficiency of the electric switching system of renewable energy on the one hand, and to improve the quality of energy supplied on the other, the purpose of the work presented in this thesis is primarily the implementation of high-performance nonlinear control law on asynchronous machine, secondly the improvement of process paths with disturbance rejection and finally ensuring stability and maintaining the disconnection between flow and torque despite changes in machine parameters. The simulation resultsobtained for motor operation show that the nonlinear and sliding mode control have best dynamic performance compared to those obtained through the application ofother control techniques. The best dynamic performances of the sliding mode control wereconfirmed by the implementation of this technique intocontrol scheme of the active and reactive power of doubly fed induction generator driven by wind turbine.The simulation results confirmthe exact decoupling and good trajectory tracking of the active and reactive power.
Diplôme : Doctorat en sciences En ligne : ../theses/electrotec/OUK7326.pdf Format de la ressource électronique : Permalink : https://bu.umc.edu.dz/md/index.php?lvl=notice_display&id=10976 Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité OUK/7326 OUK/7326 Thèse Bibliothèque principale Thèses Disponible
Titre : Controleur à logique floue pour la commande vectrorielle d'un moteur asynchrone Type de document : texte imprimé Auteurs : Ahcène Boulkoun ; Univ. de Constantine, Éditeur scientifique ; K. Belarbi, Directeur de thèse Année de publication : 1996 Importance : 69 f. Note générale : 1 Disponible au magasin de la bibliothèque centrale Langues : Français (fre) Catégories : Français - Anglais
ElectroniqueTags : Logique floue Moteur Commande vectorielle Index. décimale : 621 Electronique Diplôme : Magistère Permalink : https://bu.umc.edu.dz/md/index.php?lvl=notice_display&id=2562 Controleur à logique floue pour la commande vectrorielle d'un moteur asynchrone [texte imprimé] / Ahcène Boulkoun ; Univ. de Constantine, Éditeur scientifique ; K. Belarbi, Directeur de thèse . - 1996 . - 69 f.
1 Disponible au magasin de la bibliothèque centrale
Langues : Français (fre)
Catégories : Français - Anglais
ElectroniqueTags : Logique floue Moteur Commande vectorielle Index. décimale : 621 Electronique Diplôme : Magistère Permalink : https://bu.umc.edu.dz/md/index.php?lvl=notice_display&id=2562 Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité BOU/2907 BOU/2907 Thèse Bibliothèque principale Thèses Disponible
Titre : Etude d’une chaine de conversion de l’energie Eolienne Type de document : texte imprimé Auteurs : Naim Cherfia, Auteur ; Djallel Kerdoun, Directeur de thèse Editeur : جامعة الإخوة منتوري قسنطينة Année de publication : 2018 Importance : 144 f. Format : 30 cm. Note générale : 2 copies imprimées disponibles
Langues : Français (fre) Catégories : Français - Anglais
Electro-techniqueTags : éolienne MADA Commande vectorielle PI commande par mode glissant wind turbine DFIM Vector control sliding mode control توربينة الرياح مولدة لاتزامنية مزدوجة التغدية التحكم الشعاعي PIالتحكم الإنزلاقي Index. décimale : 622 Electro-Technique Résumé : This work presents the study of the conversion of energy produced by Doubly Fed Induction generator connected directly to the network by its stator and driven by its rotor by two bidirectional converters. First, we presented the state of the art on wind energy and the conversion systems used (types of generators, most used configurations, etc ...). Then we exposed the mathematical models of each element of the wind turbine (the wind turbine and its command MPPT + the generator). Then we evaluated and examined two methods of vector control in power of the MADA in generator mode, the first to know: the direct command and the indirect command with the help of the correctors PI. According to the simulation results obtained, the indirect vector control with two cascade loops shows better performances for an invariant system. Finally, for nonlinear systems where with non-constant parameters, we applied the sliding mode control to control the active and reactive power with the use of an inverter controlled by the SVM technique to improve the electrical energy quality. to inject this energy into the electricity grid or we note that the simulation results show the reliability and robustness of this command which is given a good track of active stator power its reference with a negligible error.
Diplôme : Doctorat en sciences En ligne : ../theses/electrotec/CHE7378.pdf Format de la ressource électronique : Permalink : https://bu.umc.edu.dz/md/index.php?lvl=notice_display&id=11027 Etude d’une chaine de conversion de l’energie Eolienne [texte imprimé] / Naim Cherfia, Auteur ; Djallel Kerdoun, Directeur de thèse . - جامعة الإخوة منتوري قسنطينة, 2018 . - 144 f. ; 30 cm.
2 copies imprimées disponibles
Langues : Français (fre)
Catégories : Français - Anglais
Electro-techniqueTags : éolienne MADA Commande vectorielle PI commande par mode glissant wind turbine DFIM Vector control sliding mode control توربينة الرياح مولدة لاتزامنية مزدوجة التغدية التحكم الشعاعي PIالتحكم الإنزلاقي Index. décimale : 622 Electro-Technique Résumé : This work presents the study of the conversion of energy produced by Doubly Fed Induction generator connected directly to the network by its stator and driven by its rotor by two bidirectional converters. First, we presented the state of the art on wind energy and the conversion systems used (types of generators, most used configurations, etc ...). Then we exposed the mathematical models of each element of the wind turbine (the wind turbine and its command MPPT + the generator). Then we evaluated and examined two methods of vector control in power of the MADA in generator mode, the first to know: the direct command and the indirect command with the help of the correctors PI. According to the simulation results obtained, the indirect vector control with two cascade loops shows better performances for an invariant system. Finally, for nonlinear systems where with non-constant parameters, we applied the sliding mode control to control the active and reactive power with the use of an inverter controlled by the SVM technique to improve the electrical energy quality. to inject this energy into the electricity grid or we note that the simulation results show the reliability and robustness of this command which is given a good track of active stator power its reference with a negligible error.
Diplôme : Doctorat en sciences En ligne : ../theses/electrotec/CHE7378.pdf Format de la ressource électronique : Permalink : https://bu.umc.edu.dz/md/index.php?lvl=notice_display&id=11027 Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité CHE/7378 CHE/7378 Thèse Bibliothèque principale Thèses Disponible
Titre : Application du formalisme bond Graph à chaine de conversion d'énergie photovoltaique Type de document : texte imprimé Auteurs : Boudjemaa Mehimmedetsi, Auteur ; Aissa Bouzid, Directeur de thèse Editeur : Constantine : Université Mentouri Constantine Année de publication : 2007 Importance : 128 f. Format : 31 cm Note générale : 2 copies imprimées disponibles Langues : Français (fre) Catégories : Français - Anglais
Electro-techniqueTags : Electro-technique: Modélisation et Commande des machines électriques Modélisation Simulation système autonome Energie solaire MPPT Commande vectorielle Photovoltaique Bond Graph Batterie Moteur à courant continu Moteur synchrone à aimant permanent Convertisseur DC/DC Solar energy Photovoltaic vectoriel command Modeling
and simulation Autonomous System Battery Converter Machine DC Permanent Magnet Synchronous Motor مدخرة الطاقة الشمسية كهروضوئي بوند غراف محول كهربائي تيار مستمر تيار مستمر محرك تيار مستمر محرك متزامن بمغنطيس دائمIndex. décimale : 622 Electro-Technique Résumé : The work presented in this thesis concerns the use of energy renewable and more particularly solar energy like means of production of Electrical energy. In the first part of This thesis we modelled by the Bond graph Method ,a photovoltaic system containing a photovoltaic, generator ,a converter, an Motor with D.C. current and a pump. To allow a better exploitation of solar energy we have adapts an order by MPPT, controlling converter DC/DC. A photovoltaic autonomous system was proposed, it makes it possible to model the system according to the real data of illumination and the temperature. This study makes it possible to evaluate the performances of an autonomous system of production of Electrical energy, low power, made up of a photovoltaic generator and a system of
storage per batteryNote de contenu : Annexes. Diplôme : Magistère En ligne : ../theses/electrotec/MEH5009.pdf Format de la ressource électronique : Permalink : https://bu.umc.edu.dz/md/index.php?lvl=notice_display&id=382 Application du formalisme bond Graph à chaine de conversion d'énergie photovoltaique [texte imprimé] / Boudjemaa Mehimmedetsi, Auteur ; Aissa Bouzid, Directeur de thèse . - Constantine : Université Mentouri Constantine, 2007 . - 128 f. ; 31 cm.
2 copies imprimées disponibles
Langues : Français (fre)
Catégories : Français - Anglais
Electro-techniqueTags : Electro-technique: Modélisation et Commande des machines électriques Modélisation Simulation système autonome Energie solaire MPPT Commande vectorielle Photovoltaique Bond Graph Batterie Moteur à courant continu Moteur synchrone à aimant permanent Convertisseur DC/DC Solar energy Photovoltaic vectoriel command Modeling
and simulation Autonomous System Battery Converter Machine DC Permanent Magnet Synchronous Motor مدخرة الطاقة الشمسية كهروضوئي بوند غراف محول كهربائي تيار مستمر تيار مستمر محرك تيار مستمر محرك متزامن بمغنطيس دائمIndex. décimale : 622 Electro-Technique Résumé : The work presented in this thesis concerns the use of energy renewable and more particularly solar energy like means of production of Electrical energy. In the first part of This thesis we modelled by the Bond graph Method ,a photovoltaic system containing a photovoltaic, generator ,a converter, an Motor with D.C. current and a pump. To allow a better exploitation of solar energy we have adapts an order by MPPT, controlling converter DC/DC. A photovoltaic autonomous system was proposed, it makes it possible to model the system according to the real data of illumination and the temperature. This study makes it possible to evaluate the performances of an autonomous system of production of Electrical energy, low power, made up of a photovoltaic generator and a system of
storage per batteryNote de contenu : Annexes. Diplôme : Magistère En ligne : ../theses/electrotec/MEH5009.pdf Format de la ressource électronique : Permalink : https://bu.umc.edu.dz/md/index.php?lvl=notice_display&id=382 Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité MEH/5009 MEH/5009 Thèse Bibliothèque principale Thèses Disponible Permalink
