Résultat de la recherche
6 recherche sur le tag
'Nombre de Nusselt' 




Titre : Effet de l’ondulation de la surface sur le transfert de chaleur par jet impactant. Type de document : texte imprimé Auteurs : Amina Derdouri, Auteur ; Zoubir Nemouchi, Auteur Mention d'édition : 22 / 03 / 2021 Editeur : جامعة الإخوة منتوري قسنطينة Année de publication : 2021 Importance : 80 f. Format : 30 cm. Note générale : 1 copies imprimées disponibles
Langues : Français (fre) Catégories : Français - Anglais
Génie MécaniqueTags : G.Mécanique: Energétique jet impactant axisymétrique plan surface ondulée cavité carrée transfert de chaleur nombre de Nusselt modèle de turbulence SST k-ω approche LES axisymmetric impinging jet slot-jet grooved surface square grooves heat transfer Nusselt number SST k-ω turbulence model LES approach نقاث مصطدم ذو تناظر محوري مستو سطح متموج تجويف مربع الانتقال الحراري عدد نوسلت نموذج الاضطراب SST k-ω مقاربة LES Index. décimale : 620 Génie Mécanique Résumé :
The present work is a numerical simulation by the ANSYS Fluent code of a jet impinging on a surface fitted with square-shaped grooves. In the first part of this thesis, a parametric study on the flow dynamics and the heat transfer in an axisymmetric turbulent impinging jet is carried out using the SST k-ω turbulence model. Different parameters are varied: the groove size C, ranging from 0 to 1.5 (mm) (where C = 0 represents the smooth surface), the nozzleto-wall distance H/D ranging from 1 to 4, and the Reynolds number Re ranging from 5000 to 30000. The velocity, kinetic energy and temperature fields in the different regions of the domain and in particular inside the grooves are presented and discussed. The results show that an increase in the cavity size leads to an increase in friction and heat transfer. The comparison between the smooth wall and the corrugated walls shows that the latter improve the average Nusselt number by 80%, 82% and 85%, for the groove sizes 0.5, 1 and 1.5 mm respectively.
Concerning the effect of the nozzle-to-target-surface distance the best heat transfer performance is obtained by using the small distance H/D = 1. As for the effect of the Reynolds number, the highest value of the Nusselt number obtained corresponds to the value of Re = 30000. In the second part of the work, the unsteady turbulent isothermal flow of a plane-in-the-mean semi-confined jet impinging on a surface fitted with square grooves is simulated using the LES approach. The configuration considered is such that the nozzle-towall distance H/L = 2, the cavity size C = 5 (mm) and the Reynolds number Re = 5000.
Diplôme : Doctorat en sciences En ligne : ../theses/gmecanique/DER7742.pdf Format de la ressource électronique : Permalink : index.php?lvl=notice_display&id=11575 Effet de l’ondulation de la surface sur le transfert de chaleur par jet impactant. [texte imprimé] / Amina Derdouri, Auteur ; Zoubir Nemouchi, Auteur . - 22 / 03 / 2021 . - جامعة الإخوة منتوري قسنطينة, 2021 . - 80 f. ; 30 cm.
1 copies imprimées disponibles
Langues : Français (fre)
Catégories : Français - Anglais
Génie MécaniqueTags : G.Mécanique: Energétique jet impactant axisymétrique plan surface ondulée cavité carrée transfert de chaleur nombre de Nusselt modèle de turbulence SST k-ω approche LES axisymmetric impinging jet slot-jet grooved surface square grooves heat transfer Nusselt number SST k-ω turbulence model LES approach نقاث مصطدم ذو تناظر محوري مستو سطح متموج تجويف مربع الانتقال الحراري عدد نوسلت نموذج الاضطراب SST k-ω مقاربة LES Index. décimale : 620 Génie Mécanique Résumé :
The present work is a numerical simulation by the ANSYS Fluent code of a jet impinging on a surface fitted with square-shaped grooves. In the first part of this thesis, a parametric study on the flow dynamics and the heat transfer in an axisymmetric turbulent impinging jet is carried out using the SST k-ω turbulence model. Different parameters are varied: the groove size C, ranging from 0 to 1.5 (mm) (where C = 0 represents the smooth surface), the nozzleto-wall distance H/D ranging from 1 to 4, and the Reynolds number Re ranging from 5000 to 30000. The velocity, kinetic energy and temperature fields in the different regions of the domain and in particular inside the grooves are presented and discussed. The results show that an increase in the cavity size leads to an increase in friction and heat transfer. The comparison between the smooth wall and the corrugated walls shows that the latter improve the average Nusselt number by 80%, 82% and 85%, for the groove sizes 0.5, 1 and 1.5 mm respectively.
Concerning the effect of the nozzle-to-target-surface distance the best heat transfer performance is obtained by using the small distance H/D = 1. As for the effect of the Reynolds number, the highest value of the Nusselt number obtained corresponds to the value of Re = 30000. In the second part of the work, the unsteady turbulent isothermal flow of a plane-in-the-mean semi-confined jet impinging on a surface fitted with square grooves is simulated using the LES approach. The configuration considered is such that the nozzle-towall distance H/L = 2, the cavity size C = 5 (mm) and the Reynolds number Re = 5000.
Diplôme : Doctorat en sciences En ligne : ../theses/gmecanique/DER7742.pdf Format de la ressource électronique : Permalink : index.php?lvl=notice_display&id=11575 Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité DER/7742 DER/7742 Thèse Bibliothèque principale Thèses Disponible Etude du comportement dynamique et thermique de fluides viscoelastiques dans des conduites de sections non-circulaires / Abdelkader Filali
![]()
![]()
Titre : Etude du comportement dynamique et thermique de fluides viscoelastiques dans des conduites de sections non-circulaires Type de document : texte imprimé Auteurs : Abdelkader Filali, Auteur ; Z. Nemouchi, Directeur de thèse ; Lyes Khezzar, Directeur de thèse Editeur : constantine [Algérie] : Université Constantine 1 Année de publication : 2014 Importance : 98 f. Format : 30 cm. Note générale : 2 copies imprimées disponibles Langues : Français (fre) Catégories : Français - Anglais
Génie MécaniqueTags : Viscoélastique problème de Graetz modèle simplifié Phan-Thien-Tanner SPTT modèle FENE-P convection à l’entrée d’une conduite nombre de Nusselt Viscoelastic Graetz problem Simplified Phan-Thien-Tanner model SPTT FENE-P
model entry flow heat transfer Nusselt number اللزجة Graetz المشكلة نموذجي التمثيل الرقمي SPTT و FENE-P تعزيز النقل الحراري معامل نقل الحرارة ?Index. décimale : 620 Génie Mécanique Résumé : The present work is dedicated to the study of the Graetz problem in straight pipes of circular and non-circular cross-sections to analyze the influence of the rheological parameters on the heat transfer enhancement with negligible viscous dissipation for a class of non-linear viscoelastic fluids constitutively represented by the simplified Phan-Thien-Tanner (SPTT) and the Finite Extensible Nonlinear Elastic-Peterlin (FENE-P) models. Numerical simulation is conducted using the finite element based software POLYFLOW and results are compared with analytical and semi-analytical
solutions available in the literature for the 2D axisymmetric pipes.
The analysis considers a constant wall heat flux boundary condition and results shows that for the SPTT model the combined elastic and shear-thinning effects represented by the parameter εWe2 lead to heat transfer enhancement. For the FENE-P model, the results show that an increase in fluid elasticity raised the normalized heat transfer coefficient due to the increased level of shear-thinning behavior. But increasing the extensibility parameter L2 leads to a decrease in Nusselt number.
Nusselt number values are obtained for the axisymmetric pipe flows for several values of polymer concentration β and the study confirms quantitatively that polymer concentration enhances heat transfer rates in FENE-P fluids. The Nusselt number distribution in the entrance region of tubes of equilateral triangular, square and rectangular cross-sections is reported for the first time for nonlinear viscoelastic fluids of the SPTT and FENE-P type.Diplôme : Doctorat en sciences En ligne : ../theses/gmecanique/FIL6487.pdf Format de la ressource électronique : Permalink : index.php?lvl=notice_display&id=9534 Etude du comportement dynamique et thermique de fluides viscoelastiques dans des conduites de sections non-circulaires [texte imprimé] / Abdelkader Filali, Auteur ; Z. Nemouchi, Directeur de thèse ; Lyes Khezzar, Directeur de thèse . - constantine [Algérie] : Université Constantine 1, 2014 . - 98 f. ; 30 cm.
2 copies imprimées disponibles
Langues : Français (fre)
Catégories : Français - Anglais
Génie MécaniqueTags : Viscoélastique problème de Graetz modèle simplifié Phan-Thien-Tanner SPTT modèle FENE-P convection à l’entrée d’une conduite nombre de Nusselt Viscoelastic Graetz problem Simplified Phan-Thien-Tanner model SPTT FENE-P
model entry flow heat transfer Nusselt number اللزجة Graetz المشكلة نموذجي التمثيل الرقمي SPTT و FENE-P تعزيز النقل الحراري معامل نقل الحرارة ?Index. décimale : 620 Génie Mécanique Résumé : The present work is dedicated to the study of the Graetz problem in straight pipes of circular and non-circular cross-sections to analyze the influence of the rheological parameters on the heat transfer enhancement with negligible viscous dissipation for a class of non-linear viscoelastic fluids constitutively represented by the simplified Phan-Thien-Tanner (SPTT) and the Finite Extensible Nonlinear Elastic-Peterlin (FENE-P) models. Numerical simulation is conducted using the finite element based software POLYFLOW and results are compared with analytical and semi-analytical
solutions available in the literature for the 2D axisymmetric pipes.
The analysis considers a constant wall heat flux boundary condition and results shows that for the SPTT model the combined elastic and shear-thinning effects represented by the parameter εWe2 lead to heat transfer enhancement. For the FENE-P model, the results show that an increase in fluid elasticity raised the normalized heat transfer coefficient due to the increased level of shear-thinning behavior. But increasing the extensibility parameter L2 leads to a decrease in Nusselt number.
Nusselt number values are obtained for the axisymmetric pipe flows for several values of polymer concentration β and the study confirms quantitatively that polymer concentration enhances heat transfer rates in FENE-P fluids. The Nusselt number distribution in the entrance region of tubes of equilateral triangular, square and rectangular cross-sections is reported for the first time for nonlinear viscoelastic fluids of the SPTT and FENE-P type.Diplôme : Doctorat en sciences En ligne : ../theses/gmecanique/FIL6487.pdf Format de la ressource électronique : Permalink : index.php?lvl=notice_display&id=9534 Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité FIL/6487 FIL/6487 Thèse Bibliothèque principale Thèses Disponible Documents numériques
![]()
texte intégraleAdobe Acrobat PDFEtude des écoulements turbulents et du transport des particules solides dans des conduites comportant une singularité. / Farid Gaci
![]()
Titre : Etude des écoulements turbulents et du transport des particules solides dans des conduites comportant une singularité. Type de document : texte imprimé Auteurs : Farid Gaci, Auteur ; Zoubir Nemouchi, Directeur de thèse Editeur : جامعة الإخوة منتوري قسنطينة Année de publication : 2018 Importance : 156 f. Format : 30 cm. Note générale : 2 copies imprimées disponibles
Langues : Français (fre) Catégories : Français - Anglais
Génie MécaniqueTags : Ecoulement interne conduite courbe nombre de Dean approche LES coefficient de frottement nombre de Nusselt Internal flow curved duct Dean number LES approach friction coefficient Nusselt number الحركة الداخلية القناة المنحنية عدد دين مقاربة LESمعامل الاحتكاك رقم نوسلت Index. décimale : 620 Génie Mécanique Résumé : The present work is a contribution to the study, by numerical simulation, of the characteristics of stationary and transient internal flows of Newtonian fluids and the transport of solid particles occurring in different pipes with singularities. In the first part of this doctoral thesis, the main objective is to analyze the three-dimensional temporal evolution of vortex spatial structures and to highlight the sequence of bifurcation of laminar
flow in main and additional counter-rotating cells caused by the duct curvature and for different numbers of Dean. Moreover, with regard to the dynamic and thermal behaviors of the flow, it is the coefficient of friction Cf and the Nusselt number Nu that have been evaluated in order to examine the analogy that may exist between these two parameters along the bent part of the pipe. The effects of the Dean number and the curvature ratio of the pipe
are presented and discussed.
The second part consists of evaluating, first, the performance of turbulence models based on the RANS approach and bringing to light the adequate numerical model allowing to better simulate the internal flow through square cross-sections curved ducts. The Large Eddy Simulation (LES) approach is then used to simulate the flow of fluid through a 90° bend with a square cross-section for three different Dean numbers in order to explore unsteady turbulent
flow phenomena despite its excessive numerical cost. Statistical and filtered parameters characterizing the three-dimensional dynamic and thermal behaviours of the turbulent flow are analysed. Special attention is paid to the effects of secondary flows obtained by the different approaches and the complex unsteady coherent eddy structures captured by the LES approach, on the non-homogeneous distributions of friction and heat transfer on the internal,
external and lateral walls of the curved duct. In addition, an additional non-exhaustive study was presented. It deals with the injection of particles. These particles were injected into a curved pipe and the wall erosion rate was evaluated for different Reynolds numbers and particle sizes.
Diplôme : Doctorat en sciences En ligne : ../theses/gmecanique/GAC7308.pdf Format de la ressource électronique : Permalink : index.php?lvl=notice_display&id=10923 Etude des écoulements turbulents et du transport des particules solides dans des conduites comportant une singularité. [texte imprimé] / Farid Gaci, Auteur ; Zoubir Nemouchi, Directeur de thèse . - جامعة الإخوة منتوري قسنطينة, 2018 . - 156 f. ; 30 cm.
2 copies imprimées disponibles
Langues : Français (fre)
Catégories : Français - Anglais
Génie MécaniqueTags : Ecoulement interne conduite courbe nombre de Dean approche LES coefficient de frottement nombre de Nusselt Internal flow curved duct Dean number LES approach friction coefficient Nusselt number الحركة الداخلية القناة المنحنية عدد دين مقاربة LESمعامل الاحتكاك رقم نوسلت Index. décimale : 620 Génie Mécanique Résumé : The present work is a contribution to the study, by numerical simulation, of the characteristics of stationary and transient internal flows of Newtonian fluids and the transport of solid particles occurring in different pipes with singularities. In the first part of this doctoral thesis, the main objective is to analyze the three-dimensional temporal evolution of vortex spatial structures and to highlight the sequence of bifurcation of laminar
flow in main and additional counter-rotating cells caused by the duct curvature and for different numbers of Dean. Moreover, with regard to the dynamic and thermal behaviors of the flow, it is the coefficient of friction Cf and the Nusselt number Nu that have been evaluated in order to examine the analogy that may exist between these two parameters along the bent part of the pipe. The effects of the Dean number and the curvature ratio of the pipe
are presented and discussed.
The second part consists of evaluating, first, the performance of turbulence models based on the RANS approach and bringing to light the adequate numerical model allowing to better simulate the internal flow through square cross-sections curved ducts. The Large Eddy Simulation (LES) approach is then used to simulate the flow of fluid through a 90° bend with a square cross-section for three different Dean numbers in order to explore unsteady turbulent
flow phenomena despite its excessive numerical cost. Statistical and filtered parameters characterizing the three-dimensional dynamic and thermal behaviours of the turbulent flow are analysed. Special attention is paid to the effects of secondary flows obtained by the different approaches and the complex unsteady coherent eddy structures captured by the LES approach, on the non-homogeneous distributions of friction and heat transfer on the internal,
external and lateral walls of the curved duct. In addition, an additional non-exhaustive study was presented. It deals with the injection of particles. These particles were injected into a curved pipe and the wall erosion rate was evaluated for different Reynolds numbers and particle sizes.
Diplôme : Doctorat en sciences En ligne : ../theses/gmecanique/GAC7308.pdf Format de la ressource électronique : Permalink : index.php?lvl=notice_display&id=10923 Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité GAC/7308 GAC/7308 Thèse Bibliothèque principale Thèses Disponible Etude analytique et numérique du transfert thermique autour d'un cylindre vertical chauffé / Chahinez Bouhzem
![]()
Titre : Etude analytique et numérique du transfert thermique autour d'un cylindre vertical chauffé Type de document : texte imprimé Auteurs : Chahinez Bouhzem ; L. Bahi, Directeur de thèse ; Univ. de Constantine, Éditeur scientifique Année de publication : 2009 Importance : 79 f. Note générale : 01 Disponible à la salle de recherche 01 Disponible au magazin de la B.U.C. 01 CD Langues : Français (fre) Catégories : Français - Anglais
PhysiqueTags : Couche limite Convection naturelle Transfert thermique Nombre de Nusselt Cylindre verticale Index. décimale : 530 Physique En ligne : ../theses/physique/BOU5528.pdf Permalink : index.php?lvl=notice_display&id=3412 Etude analytique et numérique du transfert thermique autour d'un cylindre vertical chauffé [texte imprimé] / Chahinez Bouhzem ; L. Bahi, Directeur de thèse ; Univ. de Constantine, Éditeur scientifique . - 2009 . - 79 f.
01 Disponible à la salle de recherche 01 Disponible au magazin de la B.U.C. 01 CD
Langues : Français (fre)
Catégories : Français - Anglais
PhysiqueTags : Couche limite Convection naturelle Transfert thermique Nombre de Nusselt Cylindre verticale Index. décimale : 530 Physique En ligne : ../theses/physique/BOU5528.pdf Permalink : index.php?lvl=notice_display&id=3412 Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité BOU/5528 BOU/5528 Thèse Bibliothèque principale Thèses Disponible Etude de la convection naturelle thermique et massique dans la couche limite le long d’une plaque verticale avec une force de flottabilité opposée / Abdelhalim Saadi
![]()
Titre : Etude de la convection naturelle thermique et massique dans la couche limite le long d’une plaque verticale avec une force de flottabilité opposée Type de document : texte imprimé Auteurs : Abdelhalim Saadi, Auteur ; Mayouf Si Abdallah, Directeur de thèse Editeur : Constantine : Université Mentouri Constantine Année de publication : 2011 Importance : 66 f. Format : 31 cm. Note générale : Magister
2 copies imprimées disponiblesLangues : Français (fre) Catégories : Français - Anglais
PhysiqueTags : Convection naturelle Couche limite Plaque verticale Transfert thermique et massique Nombre de Nusselt Nombre de Sherwood Force de flottabilité Index. décimale : 530 Physique En ligne : ../theses/physique/SAA6085.pdf Format de la ressource électronique : Permalink : index.php?lvl=notice_display&id=5975 Etude de la convection naturelle thermique et massique dans la couche limite le long d’une plaque verticale avec une force de flottabilité opposée [texte imprimé] / Abdelhalim Saadi, Auteur ; Mayouf Si Abdallah, Directeur de thèse . - Constantine : Université Mentouri Constantine, 2011 . - 66 f. ; 31 cm.
Magister
2 copies imprimées disponibles
Langues : Français (fre)
Catégories : Français - Anglais
PhysiqueTags : Convection naturelle Couche limite Plaque verticale Transfert thermique et massique Nombre de Nusselt Nombre de Sherwood Force de flottabilité Index. décimale : 530 Physique En ligne : ../theses/physique/SAA6085.pdf Format de la ressource électronique : Permalink : index.php?lvl=notice_display&id=5975 Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité SAA/6085 SAA/6085 Thèse Bibliothèque principale Thèses Disponible Etude de la convection naturelle thermique et massique laminaire et performante dans la souche limite autour d'un tronc de cone à paroi sinusoidale / Mayouf Si Abdallah
Permalink