Résultat de la recherche
10 recherche sur le tag
'Transfert thermique' 




Titre : Contribution à l’étude des transferts thermiques dans les nanofluides. Type de document : texte imprimé Auteurs : Ahlam Ghennai, Auteur ; Rachid Bessaih, Directeur de thèse Mention d'édition : 07/06/2021 Editeur : جامعة الإخوة منتوري قسنطينة Année de publication : 2021 Importance : 136 f. Format : 30 cm. Note générale : Doctorat 3éme CYCLE LMD.
1 copies imprimées disponibles
Langues : Français (fre) Catégories : Français - Anglais
Génie MécaniqueTags : G.Mécanique: Energétique Transfert thermique simulation numérique cavité canal nanofluides génération d’entropie modèle de mélange
Heat transfer numerical simulation cavity channel nanofluids entropy generation mixture model الحمل الحراري المحاكاة العددية التجويف القناة الموائع النانوية توليد الإنتروبيا نموذج الخليطIndex. décimale : 620 Génie Mécanique Résumé :
This thesis deals with the numerical modelling of laminar natural and mixed convection flows of different anofluids types. Numerical simulations were performed using Ansysfluent software, considering three configurations: the square cavity, the cubic cavity, and the inclined channel. The numerical results obtained were validated with those found in the literature. A good agreement was obtained. We present three parts grouping the treated configurations: The first part concerns the study of 2-D natural convection in a square cavity equipped with a pentagonal obstacle, filled with a nanofluid (Cu/Water). The effects of the Rayleigh number Ra, the volumetric concentration of nanoparticles , the aspect ratio r and the orientation of the block were discussed The second part examines the 3-D mixed convection inside a cubic cavity with a heated square-section obstacle. This study compares the single carbon nanotube CNT/water nanofluid and the hybrid CNT-Copper/water nanofluid with different concentration ratios, Richardson number Ri, Reynolds number Re, and block aspect ratio r. In this case, three correlations have been developed to predict the average Nusselt number Nu's variation as a function of the chosen parameters. The third part deals with the numerical study of laminar mixed convection with entropy generation in an inclined channel with four heated blocks, traversed by a hybrid Al2O3- Cu/water nanofluid. In this part, the use of a two-phase mixing model approach was considered to demonstrate the effects of several parameters such as Ri, Re, , θ (the channel tilt), and the position of the block on Nusselt number, entropy generations, and Bejan number. Two different correlations were also determined to express Nu's average values for the position of aligned and non-aligned blocks.
Diplôme : Doctorat En ligne : ../theses/gmecanique/GHE7758.pdf Format de la ressource électronique : Permalink : index.php?lvl=notice_display&id=11591 Contribution à l’étude des transferts thermiques dans les nanofluides. [texte imprimé] / Ahlam Ghennai, Auteur ; Rachid Bessaih, Directeur de thèse . - 07/06/2021 . - جامعة الإخوة منتوري قسنطينة, 2021 . - 136 f. ; 30 cm.
Doctorat 3éme CYCLE LMD.
1 copies imprimées disponibles
Langues : Français (fre)
Catégories : Français - Anglais
Génie MécaniqueTags : G.Mécanique: Energétique Transfert thermique simulation numérique cavité canal nanofluides génération d’entropie modèle de mélange
Heat transfer numerical simulation cavity channel nanofluids entropy generation mixture model الحمل الحراري المحاكاة العددية التجويف القناة الموائع النانوية توليد الإنتروبيا نموذج الخليطIndex. décimale : 620 Génie Mécanique Résumé :
This thesis deals with the numerical modelling of laminar natural and mixed convection flows of different anofluids types. Numerical simulations were performed using Ansysfluent software, considering three configurations: the square cavity, the cubic cavity, and the inclined channel. The numerical results obtained were validated with those found in the literature. A good agreement was obtained. We present three parts grouping the treated configurations: The first part concerns the study of 2-D natural convection in a square cavity equipped with a pentagonal obstacle, filled with a nanofluid (Cu/Water). The effects of the Rayleigh number Ra, the volumetric concentration of nanoparticles , the aspect ratio r and the orientation of the block were discussed The second part examines the 3-D mixed convection inside a cubic cavity with a heated square-section obstacle. This study compares the single carbon nanotube CNT/water nanofluid and the hybrid CNT-Copper/water nanofluid with different concentration ratios, Richardson number Ri, Reynolds number Re, and block aspect ratio r. In this case, three correlations have been developed to predict the average Nusselt number Nu's variation as a function of the chosen parameters. The third part deals with the numerical study of laminar mixed convection with entropy generation in an inclined channel with four heated blocks, traversed by a hybrid Al2O3- Cu/water nanofluid. In this part, the use of a two-phase mixing model approach was considered to demonstrate the effects of several parameters such as Ri, Re, , θ (the channel tilt), and the position of the block on Nusselt number, entropy generations, and Bejan number. Two different correlations were also determined to express Nu's average values for the position of aligned and non-aligned blocks.
Diplôme : Doctorat En ligne : ../theses/gmecanique/GHE7758.pdf Format de la ressource électronique : Permalink : index.php?lvl=notice_display&id=11591 Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité GHE/7758 GHE/7758 Thèse Bibliothèque principale Thèses Disponible Contribution à l'étude des échanges thérmiques dans un moteur Diesel atmosphérique à taux de compression variable / Abderrrezak Merabet
Titre : Contribution à l'étude des échanges thérmiques dans un moteur Diesel atmosphérique à taux de compression variable Type de document : texte imprimé Auteurs : Abderrrezak Merabet ; Univ. de Constantine, Éditeur scientifique ; Ali Bouchoucha, Directeur de thèse Année de publication : 2007 Importance : 128 f. Note générale : 01 Disponible à la salle de recherche 02 Disponibles au magazin de la B.U.C. 01 CD Langues : Français (fre) Catégories : Français - Anglais
Génie MécaniqueTags : Performances Frottement Moteur à combustion interne Transfert thermique Diesel Cycle thermodynamique Index. décimale : 620 Génie Mécanique Permalink : index.php?lvl=notice_display&id=702 Contribution à l'étude des échanges thérmiques dans un moteur Diesel atmosphérique à taux de compression variable [texte imprimé] / Abderrrezak Merabet ; Univ. de Constantine, Éditeur scientifique ; Ali Bouchoucha, Directeur de thèse . - 2007 . - 128 f.
01 Disponible à la salle de recherche 02 Disponibles au magazin de la B.U.C. 01 CD
Langues : Français (fre)
Catégories : Français - Anglais
Génie MécaniqueTags : Performances Frottement Moteur à combustion interne Transfert thermique Diesel Cycle thermodynamique Index. décimale : 620 Génie Mécanique Permalink : index.php?lvl=notice_display&id=702 Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité MER/4773 MER/4773 Thèse Bibliothèque principale Thèses Disponible
Titre : Transfert thermique dans une enceinte a paroi vibratoire Type de document : texte imprimé Auteurs : Fatiha Khadraoui ; M. Afrid, Directeur de thèse ; Univ. de Constantine, Éditeur scientifique Année de publication : 1999 Importance : 99 f. Note générale : 02 Disponibles au magasin de la bibliothèque universitaire centrale
01 Disponible à la salle de rechercheLangues : Français (fre) Catégories : Français - Anglais
Chimie IndustrielleTags : Transfert thermique Index. décimale : 661 Chimie Industrielle Permalink : index.php?lvl=notice_display&id=4506 Transfert thermique dans une enceinte a paroi vibratoire [texte imprimé] / Fatiha Khadraoui ; M. Afrid, Directeur de thèse ; Univ. de Constantine, Éditeur scientifique . - 1999 . - 99 f.
02 Disponibles au magasin de la bibliothèque universitaire centrale
01 Disponible à la salle de recherche
Langues : Français (fre)
Catégories : Français - Anglais
Chimie IndustrielleTags : Transfert thermique Index. décimale : 661 Chimie Industrielle Permalink : index.php?lvl=notice_display&id=4506 Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité KHA/3228 KHA/3228 Thèse Bibliothèque principale Thèses Disponible Etude analytique et numérique du transfert thermique autour d'un cylindre vertical chauffé / Chahinez Bouhzem
![]()
Titre : Etude analytique et numérique du transfert thermique autour d'un cylindre vertical chauffé Type de document : texte imprimé Auteurs : Chahinez Bouhzem ; L. Bahi, Directeur de thèse ; Univ. de Constantine, Éditeur scientifique Année de publication : 2009 Importance : 79 f. Note générale : 01 Disponible à la salle de recherche 01 Disponible au magazin de la B.U.C. 01 CD Langues : Français (fre) Catégories : Français - Anglais
PhysiqueTags : Couche limite Convection naturelle Transfert thermique Nombre de Nusselt Cylindre verticale Index. décimale : 530 Physique En ligne : ../theses/physique/BOU5528.pdf Permalink : index.php?lvl=notice_display&id=3412 Etude analytique et numérique du transfert thermique autour d'un cylindre vertical chauffé [texte imprimé] / Chahinez Bouhzem ; L. Bahi, Directeur de thèse ; Univ. de Constantine, Éditeur scientifique . - 2009 . - 79 f.
01 Disponible à la salle de recherche 01 Disponible au magazin de la B.U.C. 01 CD
Langues : Français (fre)
Catégories : Français - Anglais
PhysiqueTags : Couche limite Convection naturelle Transfert thermique Nombre de Nusselt Cylindre verticale Index. décimale : 530 Physique En ligne : ../theses/physique/BOU5528.pdf Permalink : index.php?lvl=notice_display&id=3412 Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité BOU/5528 BOU/5528 Thèse Bibliothèque principale Thèses Disponible Comparaison des schémas numériques de discrétisation des premier et second ordre / Fatima Zohra Ferahta
![]()
Titre : Comparaison des schémas numériques de discrétisation des premier et second ordre : application à la convection dans un conduit cylindrique Type de document : texte imprimé Auteurs : Fatima Zohra Ferahta, Auteur ; M. Afrid, Directeur de thèse Editeur : Constantine : Université Mentouri Constantine Année de publication : 2008 Importance : 97 f. Note générale : 01 Disponible à la salle de recherche 02 Disponibles au magazin de la B.U.C. 01 CD Langues : Français (fre) Catégories : Français - Anglais
PhysiqueTags : Photovolaique Ecoulement laminaire Simulation numérique Transfert thermique Convectuion mixte Conduit cylindrique Conjugué Volume fini mixed convection cylinder duct laminar flow conjugate heat transfer numerical simulation finite volume المترافق الحراري التحويلالرقائقي الجريان اسطواني أنبوب المختلط الحمل المنتهية الحجوم العددية المحاكات Index. décimale : 530 Physique Résumé : This study concerns the flow of a Newtonian and incompressible fluid in a horizontal cylindrical duct uniformly heated at the wall. The associated heat transfer modes are mixed convection in the fluid and conduction in the wall. Thermophysical fluid properties are thermo-dependant. A three dimensional numerical simulation is conducted, The finite volumes method with a second order scheme in time and space is adopted to resolve this problem, Two different heating conditions are considered: strenght of electrical current of 45 an 65 Amperes which correspond to two various Graschof numbers: Gr=244492 and 510000. The other control parameters such Reynolds and Prandtl numbers are fixed constant: Re=606 and Pr=8. The transversal secondary flow in a cross section is induced by a bouyancy effect along the duct. In a cross straight section, two contra-rotative cells are observed. These rolls are separated by the median vertical plane. The center of these rolls moves downward when the axial coordinate increases. The major points of this work consist first at a qualitative and a quantitative comparison between the results obtained by the first and the second order schemes, then a comparison with experimental results is achieved. It is to be noted that, qualitatively the first and the second order schemes give similar results but quantitatively the results obtained by the first order scheme are closer to the experimental results. These differences induce more important discrepancies of the axial Nusselt number. This is due to the fact that the second order scheme needs a more refined mesh than the first order on one hand and on other hand in the experimental results the uncertainties and the heat losses are not known. Taking into account these comments could reduce the difference between the obtained results. Diplôme : Magistère En ligne : ../theses/physique/FER5221.pdf Permalink : index.php?lvl=notice_display&id=3462 Comparaison des schémas numériques de discrétisation des premier et second ordre : application à la convection dans un conduit cylindrique [texte imprimé] / Fatima Zohra Ferahta, Auteur ; M. Afrid, Directeur de thèse . - Constantine : Université Mentouri Constantine, 2008 . - 97 f.
01 Disponible à la salle de recherche 02 Disponibles au magazin de la B.U.C. 01 CD
Langues : Français (fre)
Catégories : Français - Anglais
PhysiqueTags : Photovolaique Ecoulement laminaire Simulation numérique Transfert thermique Convectuion mixte Conduit cylindrique Conjugué Volume fini mixed convection cylinder duct laminar flow conjugate heat transfer numerical simulation finite volume المترافق الحراري التحويلالرقائقي الجريان اسطواني أنبوب المختلط الحمل المنتهية الحجوم العددية المحاكات Index. décimale : 530 Physique Résumé : This study concerns the flow of a Newtonian and incompressible fluid in a horizontal cylindrical duct uniformly heated at the wall. The associated heat transfer modes are mixed convection in the fluid and conduction in the wall. Thermophysical fluid properties are thermo-dependant. A three dimensional numerical simulation is conducted, The finite volumes method with a second order scheme in time and space is adopted to resolve this problem, Two different heating conditions are considered: strenght of electrical current of 45 an 65 Amperes which correspond to two various Graschof numbers: Gr=244492 and 510000. The other control parameters such Reynolds and Prandtl numbers are fixed constant: Re=606 and Pr=8. The transversal secondary flow in a cross section is induced by a bouyancy effect along the duct. In a cross straight section, two contra-rotative cells are observed. These rolls are separated by the median vertical plane. The center of these rolls moves downward when the axial coordinate increases. The major points of this work consist first at a qualitative and a quantitative comparison between the results obtained by the first and the second order schemes, then a comparison with experimental results is achieved. It is to be noted that, qualitatively the first and the second order schemes give similar results but quantitatively the results obtained by the first order scheme are closer to the experimental results. These differences induce more important discrepancies of the axial Nusselt number. This is due to the fact that the second order scheme needs a more refined mesh than the first order on one hand and on other hand in the experimental results the uncertainties and the heat losses are not known. Taking into account these comments could reduce the difference between the obtained results. Diplôme : Magistère En ligne : ../theses/physique/FER5221.pdf Permalink : index.php?lvl=notice_display&id=3462 Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité FER/5221 FER/5221 Thèse Bibliothèque principale Thèses Disponible Convection forcée et mixte dans un espace annulaire elliptique horizontal et incliné rempli par une mousse métallique / Meriem Benmerkhi
![]()
PermalinkModélisation des flux de chaleurs aux parois dans un moteur diesel à aspiration naturelle / Nadia Aderghal
PermalinkModélisation numérique des processus physico-chimiques dans les milieux à haute température. / Razika Hadjadj ép. Assabaa
![]()
PermalinkModélisation des processus physico-chimiques de l'écoulement d'un gaz à haute température / Souheila Chenni (Née Boutebba)
![]()
PermalinkPermalink