Résultat de la recherche
10 recherche sur le tag
'modélisation numérique' 




Modélisation numérique du comportement mécanique des jonctions tubulaires soudées des plateformes offshore. / Samira Belhour
![]()
Titre : Modélisation numérique du comportement mécanique des jonctions tubulaires soudées des plateformes offshore. Type de document : texte imprimé Auteurs : Samira Belhour, Auteur ; Ahmed Bellaouar, Directeur de thèse Mention d'édition : 24\02\2021 Editeur : جامعة الإخوة منتوري قسنطينة Année de publication : 2021 Importance : 122 f. Format : 30 cm. Note générale : 1 copies imprimées disponibles
Langues : Français (fre) Catégories : Français - Anglais
Génie MécaniqueTags : G. Mécanique: Construction mécanique méthode des éléments finis facteur d’intensité de contrainte modélisation numérique plateforme
offshore joints tubulaire joint soudés fatigue des structures éléments Shell finite element method stress intensity factor numerical modeling offshore platform tubular joints welded joints fatigue of offshore structures Shell elements طريقة العناصر المحدودة عامل شدة الإجهاد النمذجة العددية المنصة البحرية المفاصل الأنبوبية المفاصل
الملحومة التعب الهيكلي عناصر شاIndex. décimale : 620 Génie Mécanique Résumé :
Tubular steel structures are widely used in the construction of offshore platforms; several types of junctions are used in this field. The tubular members are assembled by welding, thus forming complex brace/chord intersections which represent structural discontinuities leading to high stress concentration in the vicinity of the weld bead. These joints are subjected to repeated loading over time leading to fatigue damage, hence the need to predict stresses around welded intersections. It is with this in mind that a numerical modeling of the mechanical behavior was carried out using two software programs ANSYS, and COMSOLMULTIPHYSICS. A numerical modeling in 2D with thin Shell elements and 3D with 20 Nodes solid elements was carried out by applying three basic loadings axial loading AX, in-plane bending “IPB”, out-of-plane bending “OPB” and a combined loading COM, aiming to predict the concentrations of stresses around the weld bead area. The results obtained show that for the three types of loadings AX, OPB and COM; the maximum stresses are located at saddle point However, for IPB loading they are located in a position between the two crown and saddle points. A parametric study was also performed to analyze the effect of the dimensionless geometric parameters α, , , β, . The results of SCf are validated by the parametric equations.
Note de contenu :
Annexes.Diplôme : Doctorat en sciences En ligne : ../theses/gmecanique/BEL7749.pdf Format de la ressource électronique : Permalink : index.php?lvl=notice_display&id=11582 Modélisation numérique du comportement mécanique des jonctions tubulaires soudées des plateformes offshore. [texte imprimé] / Samira Belhour, Auteur ; Ahmed Bellaouar, Directeur de thèse . - 24\02\2021 . - جامعة الإخوة منتوري قسنطينة, 2021 . - 122 f. ; 30 cm.
1 copies imprimées disponibles
Langues : Français (fre)
Catégories : Français - Anglais
Génie MécaniqueTags : G. Mécanique: Construction mécanique méthode des éléments finis facteur d’intensité de contrainte modélisation numérique plateforme
offshore joints tubulaire joint soudés fatigue des structures éléments Shell finite element method stress intensity factor numerical modeling offshore platform tubular joints welded joints fatigue of offshore structures Shell elements طريقة العناصر المحدودة عامل شدة الإجهاد النمذجة العددية المنصة البحرية المفاصل الأنبوبية المفاصل
الملحومة التعب الهيكلي عناصر شاIndex. décimale : 620 Génie Mécanique Résumé :
Tubular steel structures are widely used in the construction of offshore platforms; several types of junctions are used in this field. The tubular members are assembled by welding, thus forming complex brace/chord intersections which represent structural discontinuities leading to high stress concentration in the vicinity of the weld bead. These joints are subjected to repeated loading over time leading to fatigue damage, hence the need to predict stresses around welded intersections. It is with this in mind that a numerical modeling of the mechanical behavior was carried out using two software programs ANSYS, and COMSOLMULTIPHYSICS. A numerical modeling in 2D with thin Shell elements and 3D with 20 Nodes solid elements was carried out by applying three basic loadings axial loading AX, in-plane bending “IPB”, out-of-plane bending “OPB” and a combined loading COM, aiming to predict the concentrations of stresses around the weld bead area. The results obtained show that for the three types of loadings AX, OPB and COM; the maximum stresses are located at saddle point However, for IPB loading they are located in a position between the two crown and saddle points. A parametric study was also performed to analyze the effect of the dimensionless geometric parameters α, , , β, . The results of SCf are validated by the parametric equations.
Note de contenu :
Annexes.Diplôme : Doctorat en sciences En ligne : ../theses/gmecanique/BEL7749.pdf Format de la ressource électronique : Permalink : index.php?lvl=notice_display&id=11582 Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité BEL/7749 BEL/7749 Thèse Bibliothèque principale Thèses Disponible Modélisation numérique des processus physico-chimiques dans les milieux à haute température. / Razika Hadjadj ép. Assabaa
![]()
Titre : Modélisation numérique des processus physico-chimiques dans les milieux à haute température. Type de document : texte imprimé Auteurs : Razika Hadjadj ép. Assabaa, Auteur ; Wahiba Kaabar, Directeur de thèse Editeur : Constantine : Université Mentouri Constantine Année de publication : 2009 Importance : 94 f. Note générale : 01 Disponible à la salle de recherche 02 Disponibles au magazin de la B.U.C. 01 CD Langues : Français (fre) Catégories : Français - Anglais
ChimieTags : Chimie Analytique et Physique: Chimie physique Modélisation numérique Convection naturelle Transfert thermique Lampe à halogène Energie de Gibbs Numerical modeling halogen lamps heat transfer Gibbs energy natural convection نموذج عددي مصباح الهالوجين االنقل الحراري طاقةGibbs حمل حراري طبيعي Index. décimale : 540 Chimie et sciences connexes Résumé : The interior of an operating light source is a very hostile environment. In the familiar gas-filled incandescent lamps, large temperature gradients are present. The greatly different gas/solid boundary temperatures give rise to large temperature gradients in the near atmospheric pressure gas filling which, in turn, result in complex, buoyancy driven, recirculating flow patterns in the working gases. In this work a modeling investigation of an operating halogen lamp is described the halogen lamp was chosen to be the focus of the studies because it provided ready optical access to its axial, intra-coil regions, it allowed simple, accurate control of gas temperatures over a very wide range (300 K to more than 3,000 K) and the composition of its 5% HBr and 95% N2 cold-fill chemical dose responds in a significant and reversible manner to the changing conditions which result from changes in the filament temperature. High fidelity, Fluent 6 computational fluid dynamics (CFD) model of the lamp is created which included a sub-model to implement local Gibbs Energy minimization within the operating lamp. The finite volume method has been used to solve the equations of continuity, momentum (the Navier Stokes equations) and energy. The spatially precise knowledge of both physical conditions, and multispecies chemical composition, over a wide range of lamp operating conditions creates a unique and important opportunity to test and validate understanding of such complex systems through the use of computer based models. The model predictions were critically compared with the experimental measurements providing thereby many insights to lamp operation and guiding further modeling work. Amongst several important outcomes of the work is the observation of the effect of thermal diffusion on the relative concentration of Br atoms in the high temperature, intra-coil region. Diplôme : Magistère En ligne : ../theses/chimie/HAD5505.pdf Format de la ressource électronique : Permalink : index.php?lvl=notice_display&id=3771 Modélisation numérique des processus physico-chimiques dans les milieux à haute température. [texte imprimé] / Razika Hadjadj ép. Assabaa, Auteur ; Wahiba Kaabar, Directeur de thèse . - Constantine : Université Mentouri Constantine, 2009 . - 94 f.
01 Disponible à la salle de recherche 02 Disponibles au magazin de la B.U.C. 01 CD
Langues : Français (fre)
Catégories : Français - Anglais
ChimieTags : Chimie Analytique et Physique: Chimie physique Modélisation numérique Convection naturelle Transfert thermique Lampe à halogène Energie de Gibbs Numerical modeling halogen lamps heat transfer Gibbs energy natural convection نموذج عددي مصباح الهالوجين االنقل الحراري طاقةGibbs حمل حراري طبيعي Index. décimale : 540 Chimie et sciences connexes Résumé : The interior of an operating light source is a very hostile environment. In the familiar gas-filled incandescent lamps, large temperature gradients are present. The greatly different gas/solid boundary temperatures give rise to large temperature gradients in the near atmospheric pressure gas filling which, in turn, result in complex, buoyancy driven, recirculating flow patterns in the working gases. In this work a modeling investigation of an operating halogen lamp is described the halogen lamp was chosen to be the focus of the studies because it provided ready optical access to its axial, intra-coil regions, it allowed simple, accurate control of gas temperatures over a very wide range (300 K to more than 3,000 K) and the composition of its 5% HBr and 95% N2 cold-fill chemical dose responds in a significant and reversible manner to the changing conditions which result from changes in the filament temperature. High fidelity, Fluent 6 computational fluid dynamics (CFD) model of the lamp is created which included a sub-model to implement local Gibbs Energy minimization within the operating lamp. The finite volume method has been used to solve the equations of continuity, momentum (the Navier Stokes equations) and energy. The spatially precise knowledge of both physical conditions, and multispecies chemical composition, over a wide range of lamp operating conditions creates a unique and important opportunity to test and validate understanding of such complex systems through the use of computer based models. The model predictions were critically compared with the experimental measurements providing thereby many insights to lamp operation and guiding further modeling work. Amongst several important outcomes of the work is the observation of the effect of thermal diffusion on the relative concentration of Br atoms in the high temperature, intra-coil region. Diplôme : Magistère En ligne : ../theses/chimie/HAD5505.pdf Format de la ressource électronique : Permalink : index.php?lvl=notice_display&id=3771 Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité HAD/5505 HAD/5505 Thèse Bibliothèque principale Thèses Disponible Modélisation numérique d'une structure de souèement en forme de L supportant du sable / Ahmed Rouili
Titre : Modélisation numérique d'une structure de souèement en forme de L supportant du sable Type de document : texte imprimé Auteurs : Ahmed Rouili ; Univ. de Constantine, Éditeur scientifique ; Ahmed Boumekik, Directeur de thèse Année de publication : 2005 Importance : 161 f. Note générale : 01 Disponible à la salle de recherche 02 Disponibles au magazin de la B.U.C. Langues : Français (fre) Catégories : Français - Anglais
Génie CivilTags : Modelisation numerique Sable Structure de souèement Index. décimale : 624 Génie civil Permalink : index.php?lvl=notice_display&id=571 Modélisation numérique d'une structure de souèement en forme de L supportant du sable [texte imprimé] / Ahmed Rouili ; Univ. de Constantine, Éditeur scientifique ; Ahmed Boumekik, Directeur de thèse . - 2005 . - 161 f.
01 Disponible à la salle de recherche 02 Disponibles au magazin de la B.U.C.
Langues : Français (fre)
Catégories : Français - Anglais
Génie CivilTags : Modelisation numerique Sable Structure de souèement Index. décimale : 624 Génie civil Permalink : index.php?lvl=notice_display&id=571 Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité ROU/4403 ROU/4403 Thèse Bibliothèque principale Thèses Disponible
Titre : Modélisation numérique de terrains : étude de synthèse et application Auteurs : Wafia Boubguira ; Univ. de Constantine, Éditeur scientifique ; Sihem Meshoul, Directeur de thèse Année de publication : 2007 Importance : 133 f. Note générale : 01 Disponible à la salle de recherche 02 Disponibles au magazin de la B.U.C. 01 CD Catégories : Français - Anglais
InformatiqueTags : Modelisation numerique Terrains Synthèse Index. décimale : 004 Traitement de données. Informatique En ligne : ../theses/informatique/BOU4862.pdf Permalink : index.php?lvl=notice_display&id=272 Modélisation numérique de terrains : étude de synthèse et application [] / Wafia Boubguira ; Univ. de Constantine, Éditeur scientifique ; Sihem Meshoul, Directeur de thèse . - 2007 . - 133 f.
01 Disponible à la salle de recherche 02 Disponibles au magazin de la B.U.C. 01 CD
Catégories : Français - Anglais
InformatiqueTags : Modelisation numerique Terrains Synthèse Index. décimale : 004 Traitement de données. Informatique En ligne : ../theses/informatique/BOU4862.pdf Permalink : index.php?lvl=notice_display&id=272 Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité BOU/4862 BOU/4862 Thèse Bibliothèque principale Thèses Disponible Evaluation de la pression dynamique active sur les murs de soutènement par approche numérique / Hicham Hirane
![]()
Titre : Evaluation de la pression dynamique active sur les murs de soutènement par approche numérique Type de document : texte imprimé Auteurs : Hicham Hirane, Auteur ; A Belouar, Directeur de thèse Editeur : جامعة الإخوة منتوري قسنطينة Année de publication : 2015 Importance : 89 f. Format : 30 cm. Note générale : 2 copies imprimées disponibles
Langues : Français (fre) Catégories : Français - Anglais
Génie CivilTags : Soutènement pression latérale séisme, PLAXIS 2D modélisation numérique déplacement Retaining lateral pressure earthquake numerical modeling displacement الاستناد الضغط الجانبي الزلزال PLAXIS 2Dالنمذجة العديدية الانتقال Index. décimale : 624 Génie civil Résumé : In the practice of the current engineering, design methods of retaining walls under earthquake are essentially empirical. The dynamic pressures are calculated assuming a seismic coefficient clearly defined acting in the horizontal and vertical directions using the concept of the limit equilibrium method. Recent research shows the variability and insufficient comprehension of the seismic action on different types of retaining walls under severe earthquake effect.
The present work focuses on numerical analysis of the influence of the geometric shape of retaining walls, geotechnical soil characteristics and numerical modeling parameters their dynamic response to seismic actions essentially on the wall displacement and active lateral pressure. The analyses will be carried using the code PLAXIS 2D based on the finite element method. The results of numerical calculation will be compared with other approaches available in the literature.Diplôme : Magistère En ligne : ../theses/gcivil/HIR6880.pdf Format de la ressource électronique : Permalink : index.php?lvl=notice_display&id=10199 Evaluation de la pression dynamique active sur les murs de soutènement par approche numérique [texte imprimé] / Hicham Hirane, Auteur ; A Belouar, Directeur de thèse . - جامعة الإخوة منتوري قسنطينة, 2015 . - 89 f. ; 30 cm.
2 copies imprimées disponibles
Langues : Français (fre)
Catégories : Français - Anglais
Génie CivilTags : Soutènement pression latérale séisme, PLAXIS 2D modélisation numérique déplacement Retaining lateral pressure earthquake numerical modeling displacement الاستناد الضغط الجانبي الزلزال PLAXIS 2Dالنمذجة العديدية الانتقال Index. décimale : 624 Génie civil Résumé : In the practice of the current engineering, design methods of retaining walls under earthquake are essentially empirical. The dynamic pressures are calculated assuming a seismic coefficient clearly defined acting in the horizontal and vertical directions using the concept of the limit equilibrium method. Recent research shows the variability and insufficient comprehension of the seismic action on different types of retaining walls under severe earthquake effect.
The present work focuses on numerical analysis of the influence of the geometric shape of retaining walls, geotechnical soil characteristics and numerical modeling parameters their dynamic response to seismic actions essentially on the wall displacement and active lateral pressure. The analyses will be carried using the code PLAXIS 2D based on the finite element method. The results of numerical calculation will be compared with other approaches available in the literature.Diplôme : Magistère En ligne : ../theses/gcivil/HIR6880.pdf Format de la ressource électronique : Permalink : index.php?lvl=notice_display&id=10199 Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité HIR/6880 HIR/6880 Thèse Bibliothèque principale Thèses Disponible Modélisation par la méthode des éléments finis du comportement dynamique du couple roue-rail. / Latifa Boussalia
![]()
PermalinkContribution à l'étude de l'influence de la diffusion de l'humidité sur le transfert de chaleur à travers les milieux poreux / Fatima Zohra Chafi
PermalinkPermalinkEtude des mécanisme de transfert de chaleur et de masse sur la surface de milieu poreux aux cours de la première phase de séchage / Souad Djezzar
PermalinkPermalink